Go Down

Topic: Which kit / board should I use ???   (( HELP )) (Read 4113 times) previous topic - next topic

Snakeeyes

Currently I am researching ways to build a sound activated system.

Type of experiment:  Build a board that controls a paintball loader.

Criteria to be met:

1.  It has to detect sound and activate a 9 volt powered hobby motor that could be found at any radio shack.
     
2.  Once it has been triggered by sound, the motor will remain active for a solid 1 second interval then stop running.

3.  If the sound is consistent, the motor will continually run until said sound has ceased.

4.  Must be able to use two 9 volts.

5.  Needs to be fairly small.

There are boards on the market sold just for this in the world of paintball, however, I am interested in building my own for use in side projects.
Also the cost of those boards are around 60 bucks, so that's another reason I want to make this work ( hopefully cheaper).

If anyone can think of the simplest and cheapest way to put something together, I would greatly appreciate the input.
                                                               
                                                                       --- Many thanks,  

cr0sh

#1
Jan 24, 2011, 06:06 am Last Edit: Jan 24, 2011, 06:08 am by keeper63@cox.net Reason: 1
Heck, you could probably easily do this with a 556, a 2n2222 and a handful of passives (cost - under $5.00)...

;D

/remember - not every problem requires an entire microcontroller to solve...
I will not respond to Arduino help PM's from random forum users; if you have such a question, start a new topic thread.

Go Up
 


Please enter a valid email to subscribe

Confirm your email address

We need to confirm your email address.
To complete the subscription, please click the link in the email we just sent you.

Thank you for subscribing!

Arduino
via Egeo 16
Torino, 10131
Italy