Pages: [1]   Go Down
Author Topic: Need An Equivalent Pnp To 2sd882  (Read 1555 times)
0 Members and 1 Guest are viewing this topic.
INDIA
Offline Offline
Sr. Member
****
Karma: 0
Posts: 382
Arduino rocks
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

I am searching for a PNP transistor which will be having almost same like the 2SD880 or 2SD882 NPN transistor...

I need to switch a 0.8 amp load with a PNP transistor.. and the transistor should not get hot without a heat sink..


I have used the 2SD882 without any heatsink and have seen that it does not get hot even with a 1amp load...

so now I need a PNP transistor which will be able to take that much of load and should not get hot...
Logged

Manchester (England England)
Offline Offline
Brattain Member
*****
Karma: 626
Posts: 34207
Solder is electric glue
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

How about this:-
http://uk.farnell.com/multicomp/2n5193/transistor-pnp-1a-40v-to126/dp/1862516

If not search here:-
http://uk.farnell.com/jsp/search/browse.jsp?N=204244+110200068+110137562&No=0&getResults=true&appliedparametrics=true&locale=en_UK&divisionLocale=en_UK&catalogId=&prevNValues=204244&filtersHidden=false&appliedHidden=false&originalQueryURL=%2Fjsp%2Fsearch%2Fbrowse.jsp%3FN%3D204244%26No%3D0%26getResults%3Dtrue%26appliedparametrics%3Dtrue%26locale%3Den_UK%26divisionLocale%3Den_UK%26catalogId%3D%26prevNValues%3D204244
Logged

0
Offline Offline
Shannon Member
****
Karma: 207
Posts: 12190
Arduino rocks
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

ZTX789A:  3A rating, -0.25V Vsat at 1A, min hFE of 250 at 1A...
Logged

[ I won't respond to messages, use the forum please ]

Offline Offline
Newbie
*
Karma: 0
Posts: 48
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

I am searching for a PNP transistor which will be having almost same like the 2SD880 or 2SD882 NPN transistor...

I need to switch a 0.8 amp load with a PNP transistor.. and the transistor should not get hot without a heat sink..


I have used the 2SD882 without any heatsink and have seen that it does not get hot even with a 1amp load...

so now I need a PNP transistor which will be able to take that much of load and should not get hot...

What about a Pchannel MOSFET? MOSFET's are the ideal switches and dissipate far less heat than a biploar......
Logged

Offline Offline
Jr. Member
**
Karma: 0
Posts: 89
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

 You can use small PNP transistor with your NPN transistors as Darlington pair and  it will work as PNP.You can use 2N2907A with your NPN
Logged

Manchester (England England)
Offline Offline
Brattain Member
*****
Karma: 626
Posts: 34207
Solder is electric glue
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

Quote
You can use small PNP transistor with your NPN transistors as Darlington pair and  it will work as PNP
No you can't!
Logged

Offline Offline
Jr. Member
**
Karma: 0
Posts: 89
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

you can
Logged

Offline Offline
Jr. Member
**
Karma: 0
Posts: 89
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Here is how to connect ,This is very old use when was no easy to find PNP Silicon high power transistor

* PNP equiv..pdf (106.54 KB - downloaded 31 times.)
Logged

Offline Offline
Jr. Member
**
Karma: 0
Posts: 89
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

 SEE   http://www.richardbrice.net/darlington.htm
Logged

Pages: [1]   Go Up
Jump to: