Go Down

Topic: Making a Nunchuck connect to a rc transmitter via trainer cord - help with code (Read 2687 times) previous topic - next topic


Well I would really like to fly my planes using a nunchuck (I bought one for that purpose since i don't have a wii  )...or control a camera on the plane (pan/tilt setup)

The plan is to connect the nunchuck to an arduino nano, which would generate a ppm signal which the rc transmitter turnigy 9x (connects to the trainer port with a 3,5mm audio cable) could read and send info to plane steering it  ..

I've found some relevant link but I can't stitch the code, because I'm code illiterate..It's too advanced for me...

The most relevant link is this one from Ian Johnston: http://www.ianjohnston.com/content/index.php?option=com_content&view=article&id=30:project-rc-ppm-trainer-port-joystick&catid=3:hobbies&Itemid=8#comment-49

He interfaces joysticks with arduino, I would like to interface a nunchuck.. Is anybody in?

Here are more relevant links: http://www.rcgroups.com/forums/showthread.php?t=1231017


Here is some info about connecting arduino to nunchuck but you probably know better which ones are good: http://www.instructables.com/pages/search/search.jsp?cx=partner-pub-1783560022203827%3Anpr2q7v5m6t&cof=FORID%3A11&ie=ISO-8859-1&q=connect+arduino+to+nunchuck

Basically I can be the prototyper but I need a coder  would love if someone has a passion to do this...I think it would be a really cool project that you coders could than brag about to your colleagues :D hehe


If you do a search you should find a post regarding a nunchuk that someone was having trouble with.
I posted the code I used to interface a nunchuk (wireless and corded) to an Arduino.


Go Up

Please enter a valid email to subscribe

Confirm your email address

We need to confirm your email address.
To complete the subscription, please click the link in the email we just sent you.

Thank you for subscribing!

via Egeo 16
Torino, 10131