Go Down

Topic: DuinOS: small and simple rtos (Read 51 times) previous topic - next topic

juliandasilva

Some yes, and some no:

- OneWire and Servo are not tested now, but no work has been done there as far as I know (is it correct?)

- printf has been replaced by Yannick56 in the v0.3, with the mprintf from Paula's library (http://www.out--there.com/blog/the-devil-is-in-the-details-atmega-startup-to-freertos/)

- WiShield: Don't know.

- Tone: Must be working since the DuinOS v0.2 released by CHERTS.

Thanks Yannick! Very great work!

Cheers!
Julián
http://robotgroup.com.ar

Stijn

So I tested with the 2560 and OR must have done something wrong or there must be something wrong where the RTOS doesn't support the board:  #error "Device is not supported by DuinOS", is one of many.

Any ideas Yannick?

Thanks!

Yannick56

@Stijn

Can you reply to my  personal message in this forum ?

>So I tested with the 2560
Do you test with the latest source code (commit r27) in SVN here http://code.google.com/p/duinos/source/list ?

>#error "Device is not supported by DuinOS"
This message is at the end of the file FreeRTOSConfig.h here :
http://code.google.com/p/duinos/source/browse/trunk/arduino.DuinOS/FreeRTOSConfig.h

Yannick


Yannick56

Hello DuinOS users,

I have updated DuinOS 0.2 source code for a DuinOS 0.3 release.

You can find the changes here in the readme.txt file :
http://code.google.com/p/duinos/source/browse/trunk/Readme.txt

or in the commit list here :
http://code.google.com/p/duinos/source/list

To get the latest source code, use the svn command here
http://code.google.com/p/duinos/source/checkout

Please test and report bugs or things that don't work in this forum.

Yannick.

chaoui

thank you for this release
I  want just to know if this version 3.0 accepts: micros(), delayMicroseconds() and pulseIn(), because I use them to measure distance with an ultrasonic sensor.

Go Up