attiny85at1.name=ATtiny85 @ 1 MHz (internal oscillator BOD disabled)# The following do NOT work...# attiny85at1.upload.using=avrispv2# attiny85at1.upload.using=Pololu USB AVR Programmer# The following DO work (pick one)...attiny85at1.upload.using=arduino:arduinoisp# attiny85at1.upload.protocol=avrispv2# attiny85at1.upload.using=pololuattiny85at1.upload.protocol=stk500v1attiny85at1.upload.speed=9600attiny85at1.upload.maximum_size=8192# Default clock (slowly rising power; long delay to clock; 8 MHz internal; divide clock by 8)# Int. RC Osc. 8 MHz; Start-up time PWRDWN/RESET: 6 CK/14 CK + 64 ms; [CKSEL=0010 SUT=10]; default value# Divide clock by 8 internally; [CKDIV8=0]# Brown-out detection disabled; [BODLEVEL=111]# Preserve EEPROM memory through the Chip Erase cycle; [EESAVE=0]attiny85at1.bootloader.low_fuses=0x62attiny85at1.bootloader.high_fuses=0xD7attiny85at1.bootloader.extended_fuses=0xFFattiny85at1.bootloader.path=emptyattiny85at1.bootloader.file=empty85at1.hexattiny85at1.build.mcu=attiny85attiny85at1.build.f_cpu=1000000Lattiny85at1.build.core=tiny
JohnThe Eclipse plugin does not care about makefiles. It makes it's own makefilesfor each and every folder in the project.To exclude a folder from the build: right click the folder->Resouce configurations->exclude from build and make sure release (there should ony be release) is selected.Best regardsJantje
With Quick-Reply you can write a post when viewing a topic without loading a new page. You can still use bulletin board code and smileys as you would in a normal post.
Warning: this topic has not been posted in for at least 120 days.Unless you're sure you want to reply, please consider starting a new topic.