This is another option:http://www.pololu.com/catalog/category/74These male terminated wires plug in pretty securely into the shields. You can get male-male, male-female, do what you need on the other end.Slip them into housingshttp://www.pololu.com/catalog/product/1907 1x1, 1x2, 1x3, 2x4, 2x8, lot of sizes available.Then you've a neat terminated bunch that is all aligned. Maybe a spot of hot glue across the housing/shield joint to hold it together of needed. Or a cable tie around the board. Whatever you need.I bought several bag of 50-packs of wires & a couple bags of the 1x1 thru 1x6 housings, that stuff has been one of the handiest things I ever purchased for projects, I have gotten a lot of use out of them, and need to get some more housings now too as I am running low.The female terminations will also go over 0.025" square posts, so I have cables that I slide onto wirewrap posts too use as male terminations on boards.