Pages: [1]   Go Down
Author Topic: UdpNtpClient not working  (Read 699 times)
0 Members and 1 Guest are viewing this topic.
Offline Offline
Newbie
*
Karma: 0
Posts: 8
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Hi

I tried to run UdpNtpClient example, but it doesn't work. It sends packet but doesn't get the answer
i have changed NTP server to other but it did not help. Of course i also changed mac and ip address.
Did someone succeed running this example ? What i do wrong
Logged

Offline Offline
Newbie
*
Karma: 0
Posts: 8
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

nobody tried that example ?
Logged

Global Moderator
Netherlands
Offline Offline
Shannon Member
*****
Karma: 221
Posts: 13848
In theory there is no difference between theory and practice, however in practice there are many...
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset


which example? there are more than one on the internet....

I've used - http://www.arduino.cc/playground/Main/DS1307OfTheLogshieldByMeansOfNTP - many times succesfully.

Can your PC fetch NTP packets? blocked by the router?

recall to keep at least a minute between two calls as the NTP servers sometimes block IP addresses that send to many requests
Logged

Rob Tillaart

Nederlandse sectie - http://arduino.cc/forum/index.php/board,77.0.html -
(Please do not PM for private consultancy)

0
Offline Offline
Tesla Member
***
Karma: 145
Posts: 9683
Arduino rocks
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Quote
nobody tried that example ?

Maybe, maybe not, I just don't know.  smiley
Logged

Consider the daffodil. And while you're doing that, I'll be over here, looking through your stuff.   smiley-cool

0
Offline Offline
Edison Member
*
Karma: 17
Posts: 1413
Arduino rocks
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

http://tf.nist.gov/tf-cgi/servers.cgi

5 December 2012     Important changes:

1. The server at address 192.43.244.18 will no longer be available after 17 December 2012. We apologize for the short advance notice of this change.
Logged

* Si preguntas, pon el código de tu programa, hace mucho mas fácil ayudarte. Y me ahorro un mensaje pidiendo que lo hagas.
* Si consigues solucionar tu problema, dedica unos minutos a explicar en tu post como lo conseguiste para beneficio de todos.
* Cambia el 'Subject' de tu hilo y añade 'SOLUCIONADO' cuando hayas llegado a una solución al problema que planteaste.
* Utiliza un 'Subject' para tu hilo que explique de que va el hilo.
Si estas empezando:
* Comienza a usar Arduino
* Guías de iniciación a Arduino
* Ejemplos
* Referencia del Lenguaje
* Conceptos básicos
Guia de usuario de arduino
Tutoriales en Ingles
Si necesitas que alguien te escriba el código: http://www.freelancer.com/  o esta  http://www.guru.com/

Pages: [1]   Go Up
Jump to: