Pages: [1]   Go Down
Author Topic: Collecting/displaying data and controling controling arduino from computer.  (Read 598 times)
0 Members and 1 Guest are viewing this topic.
California
Offline Offline
Newbie
*
Karma: 0
Posts: 20
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Okay, so my friend and I are working on a project that is basically a device for determining the intensity of a light source in a bio lab.

We're using a TSL237 paired with an UNO to gather the data. Basically, all we're doing is converting the brightness to a pulse with the TSL237 and then counting the pulses over a certain period of time with the Arduino.

We've managed to get the basic function working on the arduino and are able to view the pulse count in the IDE serial monitor. Now we're trying to make a GUI that will:

  • Have a button to initiate the program
  • Display a readout of the pulse count
  • Include an entry filed to change the exposure time (how long to count the pulses)
  • And preferably save the collected data to a file on the computer

Does anybody have some ideas on how this could be accomplished?


Any help will be greatly appreciated.

~Rev

Logged

Laugh all you want; when the apes evolve, and consequently revolt against mankind... I'll be ready.

Global Moderator
Netherlands
Offline Offline
Shannon Member
*****
Karma: 211
Posts: 13477
In theory there is no difference between theory and practice, however in practice there are many...
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset


Have a look at - http://processing.org/learning/ - for that. It looks a bit like Arduino but runs on a PC/MAc and can read/write the serial port.

There are many projects on the site - http://processing.org/learning/basics/ -

and for serial port you have - http://processing.org/reference/libraries/serial/index.html -

Should get you started...


Logged

Rob Tillaart

Nederlandse sectie - http://arduino.cc/forum/index.php/board,77.0.html -
(Please do not PM for private consultancy)

Pages: [1]   Go Up
Jump to: