Loading...
« previous topic   next topic »
Pages: [1]   Go Down
Author Topic: [Sketch] [Tool] [Help] not shown in Sketch-window with Mac-OSX  (Read 246 times)
0 Members and 1 Guest are viewing this topic.
ykchan
NY
Offline Offline
Newbie
*
Karma: 0
Posts: 2
View Profile
« on: November 06, 2011, 01:31:39 pm »
 Bigger Bigger Smaller Smaller Reset Reset
I'm a Newbie just see the first "blink" with my Arduino Uno, and I am ... hooked.
I can't help but felt very acute to information presented on Getting Started web page, hope to receive enlightenment from anyone here.

The Sketch-window opens up in my Mac-OSX 10.6.8 missing the top most bar [Sketch_Tool_Help] as presented in web page
< http://arduino.cc/en/Guide/MacOSX  > under step 7 and 8 .
   
What have I done wrong?

YK
Logged
YK Chan

James C4S
Austin, TX
Offline Offline
Faraday Member
**
Karma: 41
Posts: 5171
CMiYC
View Profile
WWW
« Reply #1 on: November 06, 2011, 05:54:54 pm »
 Bigger Bigger Smaller Smaller Reset Reset
Are you also new to Mac OS X?

The bar you describe is the menu bar.  As with every other Mac application, it is at the top if the screen, not the window.
Logged
www.cmiyc.com - A guide to being an Enginerd

ykchan
NY
Offline Offline
Newbie
*
Karma: 0
Posts: 2
View Profile
« Reply #2 on: November 06, 2011, 06:44:34 pm »
 Bigger Bigger Smaller Smaller Reset Reset
Yes ... you are perfectly right, is this bar is parted from the Arduino Window relocated on the top-left of the viewable area. smiley, I freak out when I did not see them.
Thanks a lot,
Logged
YK Chan

Pages: [1]   Go Up
Print
« previous topic   next topic »
 
Jump to: