next topic »

[on:]

Hi,I need to move 4 servo with a uno

example
-servo 1 on pin ? goes from pos 0 to 24 when input pin 3 goes high and servio 1 goes back to pos 0 when pin 3 goes low

-servo 2,3,4  output will all have there own input high/low pin
 
any help would be great
thanks

[Reply #1 on:]

Code:

void loop()
    {
if (digitalRead(3))
     servo1.write(24);
else
     servo1.write(0);

if (digitalRead(x))
     servo2.write(24);
else
     servo2.write(0);

if (digitalRead(y))
     servo3.write(24);
else
     servo3.write(0);

if (digitalRead(z))
     servo4.write(24);
else
     servo4.write(0);
}

[Reply #2 on:]

i can't get the servo and input pin setup,how would i do it? every thing i tried did not work

[Reply #3 on:]

Simple button servo setup.

Code:

//zoomkat servo button test 7-30-2011

#include <Servo.h>
int button1 = 4; //button pin, connect to ground to move servo
int press1 = 0;
Servo servo1;

void setup()
{
  pinMode(button1, INPUT);
  servo1.attach(7);
  digitalWrite(4, HIGH); //enable pullups to make pin high
}

void loop()
{
  press1 = digitalRead(button1);
  if (press1 == LOW)
  {
    servo1.write(160);
  }
  else {
    servo1.write(20);
  }
}