Pages: [1]   Go Down
Author Topic: Uploading Sketches without bootloader  (Read 320 times)
0 Members and 1 Guest are viewing this topic.
Poland
Offline Offline
Jr. Member
**
Karma: 0
Posts: 58
Newbie
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

So I changed data in board.txt file ( line about protocol  atmega8.upload.protocol=avrispmkii)  to use stk500 for uploading data into ATmega should I change max upload size from  7168 to 8000 t ? 
Logged

I have solution !
But it involves spherical chickens in frictionless vacuum...

Smithfield, Rhode Island
Offline Offline
God Member
*****
Karma: 2
Posts: 843
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

I don't understand what you're trying to do. If there is no bootloader on your board, then you're not going to be able to upload a sketch at all. You would need a programmer like the AVR ISP MKii or something that supports bit banging. If you have a production ready hex file (sketch) you can deploy it without a boot loader. But then it can only be updated with a programmer.

Logged

Poland
Offline Offline
Jr. Member
**
Karma: 0
Posts: 58
Newbie
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

I have ISP-programmer , how I can produce hex file ?
Logged

I have solution !
But it involves spherical chickens in frictionless vacuum...

Pages: [1]   Go Up
Jump to: