Go Down

Topic: Upload Timeout Error on Mega 2560 - Not Sure What Changed (Read 59 times) previous topic - next topic

massivesound

#5
Dec 23, 2011, 09:34 pm Last Edit: Dec 23, 2011, 09:38 pm by massivesound Reason: 1
I'm having the exact same problem.  I wrote and updated code for a day, then moved the arduino to another computer, and I get the same errors.  The original code still executes, I just can't upload new code to the board.  Is there a way to reinstall the firmware?

johnwasser

Send Bitcoin tips to: 1L3CTDoTgrXNA5WyF77uWqt4gUdye9mezN
Send Litecoin tips to : LVtpaq6JgJAZwvnVq3ftVeHafWkcpmuR1e

massivesound

I fixed the problem I was having by getting the newest build of the Arduino software and reinstalling the driver from the Arduino folder.

michael635

I have the same issue with the Mega2560R3 board.

I have WinXP SP3 on a ThinkPad T-40.  I have tried on a different machine with the same errors.

I tried the 'press the reset button' just after hitting the upload.  Four tries and Blink finally uploaded.

Blink is running, but I wanted t play and changed the timing pause statements, but have not been able to upload.

I have tried the other ISP with no result.

My Com port shows Arduino Mega 2560 R3 (COM6) and the driver is usbser.sys Microsoft Corp 5.1.2600.5512(xpsp.080413-2108)

USB\VID_2341&PID_0042\64934333135351418100

I have selected the correct board and compost, and have used the AVRISP mkII

The RX light blinks once in a while.

Thoughts to help me get this running?



Ideas
...and dinosaurs roamed the earth.....

michael635

...and dinosaurs roamed the earth.....

Go Up