Pages: [1]   Go Down
Author Topic: t6963c Help Needed  (Read 812 times)
0 Members and 1 Guest are viewing this topic.
Offline Offline
Newbie
*
Karma: 0
Posts: 2
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Ok so all of the hardware work is done, the pins are wired correctly and voltages are set.  The problem im having is with the t6963c Library.  When I load the example sketch and try to compile it I get errors referring to missing parts of the t6963 Class "t6963 class Has no member 'setpixel'" and tons of other errors of missing things too.  Anyone experience this or know what to do to fix it?
Logged

Massachusetts, USA
Offline Offline
Tesla Member
***
Karma: 212
Posts: 8970
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Which t6963c library are you using?  http://code.google.com/p/arduino-t6963c/downloads/list ?

That library has not been updated for Arduino 1.0 yet.  Change "WProgram.h" in T6963.h and T6963.cpp to "Arduino.h".  That fixes it.
Logged

Send Bitcoin tips to: 1L3CTDoTgrXNA5WyF77uWqt4gUdye9mezN
Send Litecoin tips to : LVtpaq6JgJAZwvnVq3ftVeHafWkcpmuR1e

Offline Offline
Newbie
*
Karma: 0
Posts: 2
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Yes that is the library im using.  The example sketch is the 240x64 example.

I fixed what you suggested in a few spots where that file was referenced and it compiled ok.  Thank you so much for your help! 
Logged

Pages: [1]   Go Up
Jump to: