Pages: [1]   Go Down
Author Topic: Shifty VU shield: Frequenzy to numbers on serial port?  (Read 840 times)
0 Members and 1 Guest are viewing this topic.
Offline Offline
Newbie
*
Karma: 0
Posts: 32
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Hi,
I have a duemilanove with a shifty VU shield and a kind of urgent problem:

I need somecode which gets sound of a certain frequnzy on the audio input (german 5tonfolge).
each frequenzy should then be translated in a single numbre as output on the serial port fo the arduino.

I have just done a bit code for LEDs so far (by modified a bit of the macetech example code) so any help will be greatly appreciated.

EDIT:
First essential hint needed: How to solder a serial cable for ttyS0 and get some numbres sent to it?
Don't I just have to connect Rx an Tx between arduino and the serial cable?
« Last Edit: January 20, 2012, 05:22:59 am by mclien » Logged

SF Bay Area
Offline Offline
Edison Member
*
Karma: 11
Posts: 1244
Arduino Ninja
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

The Shifty VU Shield doesn't process individual frequencies, it's a VU or loudness meter. It won't do what you are asking.

If you want serial data, you could just use the serial to USB that's already on the Arduino. Otherwise, you will need an RS232 level conversion/inversion chip to connect the Arduino directly to a +/- 12V RS232 port.
Logged

Unique RGB LED Modules and Arduino shields: http://www.macetech.com/store

Montreal
Offline Offline
Faraday Member
**
Karma: 29
Posts: 2590
Per aspera ad astra.
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

This project:
http://fftarduino.blogspot.com/2011/02/color-organ-spectrum-analyzer-on.html
has CLI built-in command "f", which print out on serial monitor magnitudes of the freq. components
What is your spec.: freq, resolution, dynamic range etc.  you want to achieve?
Logged

Pages: [1]   Go Up
Jump to: