Pages: [1]   Go Down
Author Topic: Remote Serial Data Monitor aka ASerMo /w cheap 433  (Read 727 times)
0 Members and 1 Guest are viewing this topic.
0
Offline Offline
Sr. Member
****
Karma: 4
Posts: 342
A SWL life as a coder... I'll try.
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

Guten Tag,

since a few days I'm working on a small remote monitor for data that are send with serial protocol via a 433 MHz TX to 433 MHz RX bridge. I'm using inexpensive 433 MHz modules from a german electronic store (the "big C") for about 15,- EURO.

Serial data could be sent with a maimum of 1200 bd. 2400 bd causes to much error without an error correction functionality. My idea is to display any kind of data that I send with a small wscript code to com1 like weather data, tv program, joke of the day etc.  smiley-wink No, I don't want to use the Ethernetshield, what could be used for that, too smiley=

This is what I have until now:



Menu isn't working, yet. To be continued...
Logged


Pages: [1]   Go Up
Jump to: