Go Down

Topic: Fake Moon (lunar eclipse simulator) (Read 1 time) previous topic - next topic

macegr

A friend was having birthday party late yesterday, to coincide with viewing the total lunar eclipse. That evening I realized there was quite a lot of cloud cover, and it was cold outside. I decided to build a moon simulator so that we could keep an eye on the eclipse regardless of the weather.



The enclosure was whipped up in about 20 minutes, using white poster board and clear packing tape. I found a good moon photo online, printed it out and glued it over a cutout in the box. Grabbed a bunch of parts from the spares box: an Arduino UNO, a ShiftBrite Shield, a ShiftBar, a ChronoDot, and a Satellite Module 001. Soldered the ChronoDot in place, taped everything inside the box, and started developing code. All told, about an hour and a half for the whole project due to a couple false starts.



The simulator doesn't show a moving shadow, but it does begin dimming the moon brightness through penumbra. During umbra, the moon dims further and takes on a orange-red hue into totality. The photo shows up a lot redder than in person, it's a bit more orange. The process is reversed out of eclipse. Each phase was synchronized using the ChronoDot, according to NASA eclipse data. I don't have the code to post here yet, but will do so in a couple days.



It was a success, and let us keep an eye on the eclipse. Fortunately there were occasional breaks in the cloud cover, so we were able to walk outside and view the real eclipse once in a while.
Unique RGB LED Modules and Arduino shields: http://www.macetech.com/store

retrolefty

Nice. I too was able to see some of the eclipse last night, however clouds did come and go a lot.

pwillard

#2
Dec 23, 2010, 01:36 am Last Edit: Dec 23, 2010, 01:37 am by pwillard Reason: 1
I got to see it too... a few times...   Much fun.   This is an awesome project for moon-lovers.

FYI:  My PC is named "blackmoon" on the home LAN.  Has been for eons.  ;)

Go Up
 

Quick Reply

With Quick-Reply you can write a post when viewing a topic without loading a new page. You can still use bulletin board code and smileys as you would in a normal post.

Warning: this topic has not been posted in for at least 120 days.
Unless you're sure you want to reply, please consider starting a new topic.

Note: this post will not display until it's been approved by a moderator.
Name:
Email:

shortcuts: alt+s submit/post or alt+p preview