I found there were issues with 1.0 support for the ATtiny.
Would this be an appropriate library to add to the list on this page: http://arduino.cc/en/Reference/Libraries
Is this different/better somehow from the encoding that the VirtualWire library does for the same kind of transmitter/receivers?
QuoteI found there were issues with 1.0 support for the ATtiny. ?QuoteWould this be an appropriate library to add to the list on this page: http://arduino.cc/en/Reference/LibrariesDoes the library work on an Uno?
Which core are you using?
avrdude: please define PAGEL and BS2 signals in the configuration file for part ATtiny85avrdude: please define PAGEL and BS2 signals in the configuration file for part ATtiny85avrdude: stk500_paged_write(): (a) protocol error, expect=0x14, resp=0x64avrdude: stk500_cmd(): protocol error
protocol error, expect=0x14, resp=0x64
Thanks for the offer - I've sent you a PM.
Is there a bug tracking this so it will be fixed in Arduino IDE 1.1?
Excellent! I'm glad you have it working.QuoteWould this be an appropriate library to add to the list on this page: http://arduino.cc/en/Reference/LibrariesProbably. I suspect there are two obstacles...1. "Full" Arduino support. I believe all those libraries have been shown to work on most or all Arduino boards. At a minimum, your library should be tested on one or both Mega boards.2. Attention. The Arduino folks have fallen a bit behind in the documentation. Even if they agree to add your library, I suspect it would be months before it happened. Were I in your shoes I would continue the path you've started: publishing and documenting from a site you control.
Is there any official process to have the library added to a list for future consideration?
Please enter a valid email to subscribe
We need to confirm your email address.
To complete the subscription, please click the link in the
email we just sent you.
Thank you for subscribing!
via Egeo 16