Loading...
« previous topic   next topic »
Pages: [1]   Go Down
Author Topic: morse code walkie talkies  (Read 250 times)
0 Members and 1 Guest are viewing this topic.
ellabay97
Offline Offline
Newbie
*
Karma: 0
Posts: 2
View Profile
« on: January 29, 2012, 04:41:18 pm »
 Bigger Bigger Smaller Smaller Reset Reset
hey there, i had the idea of making a set of morse code walkie talkies that could send and receive morse code as LED flashes but wasn't sure how to send the signal between the two modules. i am new to arduino and any help would be terrific. thanks so much
ellabay smiley
Logged

robtillaart
Netherlands
Offline Offline
Tesla Member
***
Karma: 88
Posts: 9392
In theory there is no difference between theory and practice, however in practice there are many...
View Profile
« Reply #1 on: January 29, 2012, 04:43:40 pm »
 Bigger Bigger Smaller Smaller Reset Reset

you might add some XBEE modules, not a wide range but still a big fun project!
Logged
Rob Tillaart

Nederlandse sectie - http://arduino.cc/forum/index.php/board,77.0.html -

Grumpy_Mike
Manchester (England England)
Offline Offline
Brattain Member
*****
Karma: 274
Posts: 25481
Solder is electric glue
View Profile
WWW
« Reply #2 on: January 29, 2012, 05:08:11 pm »
 Bigger Bigger Smaller Smaller Reset Reset
You won't get much of a range with LEDs. Detecting them is difficult. The best you can do is probably get a receiver for an IR remote and get that to either send and receive data or get it to detect morse.
Logged

ellabay97
Offline Offline
Newbie
*
Karma: 0
Posts: 2
View Profile
« Reply #3 on: January 29, 2012, 05:20:39 pm »
 Bigger Bigger Smaller Smaller Reset Reset
thanks for the help, it gave me a clearer picture of what i need to do.
ellabay
Logged

Pages: [1]   Go Up
Print
« previous topic   next topic »
 
Jump to: