Pages: [1]   Go Down
Author Topic: Little Bit of Help Stepper Motor connection  (Read 550 times)
0 Members and 1 Guest are viewing this topic.
Offline Offline
Newbie
*
Karma: 0
Posts: 5
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Hi could some one with far more experience than me as i have no experience in stepper motors
and or have no experience using the easy stepper driver board version 4.4 Please could you tell me
if the stepper board connections AA BB what one of AA is the Positive and what one of BB connections is
the Positive  this is the PDF of the Stepper motor i got

http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Robotics/57BYGH420.PDF

all i know is to be able to run this stepper motor as bi-poler i leave out the yellow and white wire's
thanks
neil
Logged

0
Online Online
Shannon Member
****
Karma: 216
Posts: 12554
Arduino rocks
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Hi could some one with far more experience than me as i have no experience in stepper motors
and or have no experience using the easy stepper driver board version 4.4 Please could you tell me
if the stepper board connections AA BB what one of AA is the Positive and what one of BB connections is
the Positive  this is the PDF of the Stepper motor i got

http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Robotics/57BYGH420.PDF

all i know is to be able to run this stepper motor as bi-poler i leave out the yellow and white wire's
thanks
neil
Yes, ignore the white and yellow.

Black and green are one winding, red and blue the other.  From what I can see of the EasyDriver docs you could wire black=1, green=2, red=3, blue=4
Logged

[ I won't respond to messages, use the forum please ]

Offline Offline
Newbie
*
Karma: 0
Posts: 5
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Thank you MarkT
Logged

Pages: [1]   Go Up
Jump to: