Go Down

Topic: 8-14V input with regulated 12V output needed (Read 956 times) previous topic - next topic

Z0rr0

This would be for a car application, 8-10V when cranking, 12.5V not running, and 13.5ish when running.
I have a sensor that i need to provide a stable 12V with any of those input voltages.
Anybody got any ideas?

i tried a radio-shack 12V TO220 package regulator, but it wants at least 14v input.. it works, but not very well.

retrolefty

At what maximum current output value?

You could use a switching boost regulator to boost to say 15vdc, feeding a switching buck regulator adjusted down to +12dc output.

Lefty




royco

You would need a sepic or buck/boost switching power supply. Search for them on ebay. They have modules that can power up to 2 Amps.
Panucatt Devices


jwatte

#4
Feb 13, 2012, 11:40 pm Last Edit: Feb 13, 2012, 11:42 pm by jwatte Reason: 1
It's probably actually easier to boost to 16-24V, and then regulate back down to 12V, especially if you don't need a lot of current.
Digi-Key has literally hundreds of different voltage converters that will do the trick.
Try an LM2585 perhaps?
Or a ready-made module for about $5. Something like http://search.digikey.com/us/en/products/VBSD1-S12-S12-SIP/102-1365-ND/989820
Higher-end parts with wider input range: http://search.digikey.com/us/en/products/VWRBS2-D12-S12-SIP/102-1511-ND/1558906

Go Up