Go Down

Topic: EtherTen + Ridiculous code (Read 1 time) previous topic - next topic


Feb 19, 2012, 07:23 am Last Edit: Feb 19, 2012, 07:26 am by SamuelFreeman Reason: 1
Hi Guys,

Been working for a few weeks on a project to turn on/off some power points via relays and using the EtherTen's ethernet features, so to start with I started with a basic bit of code to start a webserver on the arduino with a simple bit of text to click on and off the lights. However I didn't want to use the actual arduino hosted page due to its not so pretty looks, so I hosted a website on my XAMPP server that looks a bit nice and created a link to the arduino ie The problem was that it navigated away from my pretty page and after three days I couldn't get an iframe to work so I have to use Jquery and JSON, see code below.

The XAMPP side code
Code: [Select]

<span style="float:right;padding-top:10px;padding-right:12px;font-size:18px; font-weight:bold;"><span onclick="javascript:{$.get('');}">ON</span> | <span onclick="javascript:{$.get('');}">OFF</span></li></span>

The Ardunio Code
Code: [Select]

#include <SPI.h>
#include <Ethernet.h>

byte mac[] = { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED }; //physical mac address
byte ip[] = { 192, 168, 2, 102 }; // ip in lan
byte gateway[] = { 192, 168, 2, 1 }; // internet access via router
byte subnet[] = { 255, 255, 255, 0 }; //subnet mask
Server server(84); //server port

String readString;


void setup(){

 pinMode(4, OUTPUT); //pin selected to control
 pinMode(2, OUTPUT); //pin selected to control
 //start Ethernet
 Ethernet.begin(mac, ip, gateway, subnet);

 //enable serial data print
 Serial.println("SFAP Running"); // so I can keep track of what is loaded

void loop(){
 // Create a client connection
 Client client = server.available();
 if (client) {
   while (client.connected()) {
     if (client.available()) {
       char c = client.read();

       //read char by char HTTP request
       if (readString.length() < 100) {

         //store characters to string
         readString += c;

       //if HTTP request has ended
       if (c == '\n') {

         Serial.println(readString); //print to serial monitor for debuging

         ///////////////////// control arduino pin
         if(readString.indexOf("on4") >0)//checks for on
           digitalWrite(4, HIGH);    // set pin 4 high
           Serial.println("Led 4 On");
         if(readString.indexOf("off4") >0)//checks for off
           digitalWrite(4, LOW);    // set pin 4 low
           Serial.println("Led 4 Off");
         if(readString.indexOf("on2") >0)//checks for on
           digitalWrite(2, HIGH);    // set pin 4 high
           Serial.println("Led 2 On");
         if(readString.indexOf("off2") >0)//checks for off
           digitalWrite(2, LOW);    // set pin 4 low
           Serial.println("Led 2 Off");
         //now output HTML data header
            if(readString.indexOf('?') >=0) { //don't send new page
              client.println("HTTP/1.1 204 Jotaris");
            else {
         client.println("HTTP/1.1 200 OK"); //send new page
         client.println("Content-Type: application/json");

client.print("Switch 1 = ON");
else if(readString.indexOf("off2")>0)
client.print("Switch 1 = OFF");
               client.print("Switch 1 = UNKNOWN");
client.print("; ");
client.print("Switch 2 = ON");
else if(readString.indexOf("off4")>0)
client.print("Switch 2 = OFF");
               client.print("Switch 2 = UNKNOWN");


         //stopping client
         //clearing string for next read


The questions are...

1. Is there a way to for me to read the state of the relay (its not double pole so it would have to remember if its on or off) and request the information from my XAMPP site so when I go the page it can tell me if my lights are on?

2. I have a PIR that I would like to activate one of the relays by motion sensing as well as by my website? Ie I have a light outside plugged into one of the powerpoints with a relay and I would like it to turn on when I walk past. As well as being able to manually turn in on?

I can run a mysql database and php off my server to hold values if there is a way for the arduino to read commands from a database. That way the DB could remember the relay state.

Idea's and thoughts would be much appreciated.


For question 1, you could use an optocoupler in series with the relay.
(i missed what voltage it is, etc) this could then feed back the state.

You simply have the contacts in parallel, so that it turns on the relay from either the PIR, controller, or a switch.


Go Up