Pages: [1]   Go Down
Author Topic: how to put voltage on Mega Sensor Shield v1.2  (Read 1313 times)
0 Members and 1 Guest are viewing this topic.
Offline Offline
Newbie
*
Karma: 0
Posts: 3
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Good day

     Using the Mega Sensor Shield v1.2 and I must be missing an information to supply voltage.  Would someone know how I could attach my battery to the Mega Sensor Shield v1.2?   The Mega 2560 has a Vin input so I could get my battery wire to Vin and Gnd but now that I have the Mega Sensor Shield v1.2 on top, I can not apply voltage to both the Mega and the Senor Shield.   

     I seem to have bought the last one from RobotShop.  it is the DFRobot Sensor Shield v1.2

     Thank you in advance for any help
Logged

Long Island, NY
Offline Offline
Newbie
*
Karma: 0
Posts: 1
Arduino rocks
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

According to http://arduino-direct.com/sunshop/index.php?l=product_detail&p=195, for v2 of the sensor shield you remove the jumper. Probably the same for the older version.
Logged

Pages: [1]   Go Up
Jump to: