next topic »

[Reply #15 on:]

and.... if i want to extract out the program from PIC then  i will find the HEX in C:\

??

[Reply #16 on:]

No not implemented yet :s

But don't worry I'm working on that

By the way, I'm working on the GUI, so that everything gets simpler, here is how it should look :

[Reply #17 on:]

That is further very nice, but how long will it take?

[Reply #18 on:]

I may finish it in less than one hour if everything goes well.

As I'm a student, and that the holidays fiinishe today I will only be able to post updates on week-end from now on.

[Reply #19 on:]

That is fine Sorrane, i look forward to the finalization.

[Reply #20 on:]

Here is the reading part working :

[Reply #21 on:]

Uploaded the prog to second post, but it's still buggy, and doesn't support config word yet

[Reply #22 on:]

Really good work Soranne,I'm very intrested in this too,Will give it a try on later on the pic's i have and report back,Great Work Thanks 

[Reply #23 on:]

Thanks a lot sorrane for the finalization of that software, also which all pic's can we read? and do we have to select the respective PIC from the dropdown then in that case which one PIC you have covered?

also, Does the Arduino programme remains the same?

Also, Do we get the HEX file read from the PIC under C:/ drive?

[Reply #24 on:]

WAS TRYING OUT WITH 2 12F683'S
 I got the following (see attachement) prompt from it and while it shows all zeros in bits everywhere, so where im wrong.

The way i made connections to the 12F683 are in the attachment named conn..

EDIT:
the app is hanging when i click on read

[Reply #25 on:]

The program doen't work with  12F683 yet, I have to add support :s

But reading should work normally, if the program freezes that may be because you didn't reset the Arduino before starting the prog...
Tell me if it still doesn't work.
But remeber this is a beta version, so still a bit buggy... :s

For the read function : it only reads the 50 first words. And your connection with pic seems to be fine.

[Reply #26 on:]

Its fine if it doesnt work with 12F683 but i really appreciate your efforts --> 

Ya it still doesn't work , i'm utilizing the program as follows

1) Reset the arduino (offcourse after the sketch is loaded on arduino)
2) Then start the Windows programme that you made.
3) change the Port to the one which im connecting the arduino with.
4) Then i change the name of the PIC to 12F683

then click on read, but nothing works the windows opens at some try's but it all shows 0000000000 , first i thought it may be happening bcz the PIC may be locked on its bits to protect the software , then i used another 12F683 that i bought afresh and after writing to it many times, whenver i read and if it worked sometimes then it shows all 000000000 in bits

[Reply #27 on:]

That is weird, maybe the 12F683 has a really different protocol I need to checkout the datasheet.

[Reply #28 on:]

Any Update?

[Reply #29 on:]

As I'm a student, and that I have a lot of homework during the week I can only work on this project on week-ends.
Sorry about that.