Pages: 1 2 3 [4] 5 6   Go Down
Author Topic: Arduino as a Pic Programmer!  (Read 78918 times)
0 Members and 2 Guests are viewing this topic.
0
Offline Offline
Newbie
*
Karma: 0
Posts: 2
Arduino rocks
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Hi soranne,

sorry, I don´t speak english very good

I know how to get 12V from USB port, There are two ways:

1.-With a coil and a zenner

2.- With capacitors, Diodes and a zenner

the first option are more easy but it is more difficult to get the coil.

I will post here how to make

reggards.
Logged

Caen, France
Offline Offline
Newbie
*
Karma: 0
Posts: 3
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

Quote
I wrote a similar sketch for the PIC18F2550 ( a slight modification can adopt it to almost all pic18F2/4 family). the sketch and the instruction can be found over here:

https://sites.google.com/site/thehighspark/arduino-pic18f
Damn ! Project already done !
Well, I'll still try to do it, at least to understand the ICSP method and achieve implementation by myself.
But, even so I am disgusted ! >.< I was caught up again ! Just my luck !
Logged

France
Offline Offline
Jr. Member
**
Karma: 3
Posts: 72
Arduino rocks
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

Hey all! sorry for answering so late but I have been busy with a lot of homework :s
I have to say I am not sure I will be able to work again on this project because it involves a lot of time (coding a programming method for nearly every pic!).
What Is suggest is that someone who is really motivated gathers all the programming methods for each pic to make one nice prog.

Hope I can help again!
Logged

My projects :
- Interfacing with Minitel : http://www.arduino.cc/cgi-bin/yabb2/YaBB.pl?num=1271350467
- Arduino PIC programmer : http://ardu

Offline Offline
Newbie
*
Karma: 0
Posts: 4
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

hi soranne where i can find your program c# to load pic?
also what is latest state your project?
Logged

Offline Offline
Newbie
*
Karma: 0
Posts: 4
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

and soranne your project page (https://sites.google.com/site/thehighspark/arduino-pic18f )  is broken
is there any alternatif link??
Logged

France
Offline Offline
Jr. Member
**
Karma: 3
Posts: 72
Arduino rocks
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

Dear mahk,

I am sorry this page is not my project.
Logged

My projects :
- Interfacing with Minitel : http://www.arduino.cc/cgi-bin/yabb2/YaBB.pl?num=1271350467
- Arduino PIC programmer : http://ardu

Offline Offline
Newbie
*
Karma: 0
Posts: 4
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

hey soranne can you give me  alink for this project(circuit,program)
i need this project for my thesis in school
Logged

France
Offline Offline
Jr. Member
**
Karma: 3
Posts: 72
Arduino rocks
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

All the infromation I have is on the first page
Logged

My projects :
- Interfacing with Minitel : http://www.arduino.cc/cgi-bin/yabb2/YaBB.pl?num=1271350467
- Arduino PIC programmer : http://ardu

Offline Offline
Newbie
*
Karma: 0
Posts: 1
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Hi!

A good project!
In case interested, I've created an Arduino programmer for PIC32 series. The details are found at http://code.google.com/p/ardupic32/.

Cheers!
Logged

Offline Offline
Newbie
*
Karma: 0
Posts: 2
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Hi Soranne!

I think you save me! Please tell me that I can program a PIC18F452 or a PIC16F88 (with I prefer) using your project.
Logged

France
Offline Offline
Jr. Member
**
Karma: 3
Posts: 72
Arduino rocks
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

Hi Soranne!

I think you save me! Please tell me that I can program a PIC18F452 or a PIC16F88 (with I prefer) using your project.

Hey!
Of course you can! But depending on the protocol they use you may need to adapt a bit the code.
Logged

My projects :
- Interfacing with Minitel : http://www.arduino.cc/cgi-bin/yabb2/YaBB.pl?num=1271350467
- Arduino PIC programmer : http://ardu

France
Offline Offline
Jr. Member
**
Karma: 3
Posts: 72
Arduino rocks
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

But personnaly I would prefer the beaglebone to the raspberry pi smiley-wink
The beaglebone looks more like an arduino (you can easily access the inputs/outputs and and shields)  and is more powerful than a raspberry pi, even if it's a bit more expensive.
Logged

My projects :
- Interfacing with Minitel : http://www.arduino.cc/cgi-bin/yabb2/YaBB.pl?num=1271350467
- Arduino PIC programmer : http://ardu

Offline Offline
Newbie
*
Karma: 0
Posts: 1
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

How do i connect the pic16f684? I checked the datasheet and it doesnt have pins labeled as RB4 RB6 AND RB7? smiley-sad
« Last Edit: May 24, 2012, 02:25:55 am by itchan » Logged

Offline Offline
Newbie
*
Karma: 0
Posts: 6
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Hi all,

Mine is PIC16F887

Im trying to program it using your programmer (the .exe application) and have few question.

How to send the command "s" ? i want to program using low voltage.

and how to wire it? here's what I got from my PIC datasheet.(attached)


hoping someone can give me circuit suggesstion. thanks  smiley
Logged

Offline Offline
Newbie
*
Karma: 0
Posts: 1
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Hint: If you look at post #2 and there is no link to the *.exe file, you have to create a forum account and log in. An advise in post #2 would be nice.
Logged

Pages: 1 2 3 [4] 5 6   Go Up
Jump to: