Go Down

Topic: Arduino as a Pic Programmer! (Read 92147 times) previous topic - next topic

aepiscis

Hi soranne,

sorry, I donĀ“t speak english very good

I know how to get 12V from USB port, There are two ways:

1.-With a coil and a zenner

2.- With capacitors, Diodes and a zenner

the first option are more easy but it is more difficult to get the coil.

I will post here how to make

reggards.

Quote
I wrote a similar sketch for the PIC18F2550 ( a slight modification can adopt it to almost all pic18F2/4 family). the sketch and the instruction can be found over here:

https://sites.google.com/site/thehighspark/arduino-pic18f
Damn ! Project already done !
Well, I'll still try to do it, at least to understand the ICSP method and achieve implementation by myself.
But, even so I am disgusted ! >.< I was caught up again ! Just my luck !

Soranne

Hey all! sorry for answering so late but I have been busy with a lot of homework :s
I have to say I am not sure I will be able to work again on this project because it involves a lot of time (coding a programming method for nearly every pic!).
What Is suggest is that someone who is really motivated gathers all the programming methods for each pic to make one nice prog.

Hope I can help again!
My projects :
- Interfacing with Minitel : http://www.arduino.cc/cgi-bin/yabb2/YaBB.pl?num=1271350467
- Arduino PIC programmer : http://ardu

mahk

hi soranne where i can find your program c# to load pic?
also what is latest state your project?

mahk

and soranne your project page (https://sites.google.com/site/thehighspark/arduino-pic18f )  is broken
is there any alternatif link??

Soranne

Dear mahk,

I am sorry this page is not my project.
My projects :
- Interfacing with Minitel : http://www.arduino.cc/cgi-bin/yabb2/YaBB.pl?num=1271350467
- Arduino PIC programmer : http://ardu

mahk

hey soranne can you give me  alink for this project(circuit,program)
i need this project for my thesis in school

Soranne

All the infromation I have is on the first page
My projects :
- Interfacing with Minitel : http://www.arduino.cc/cgi-bin/yabb2/YaBB.pl?num=1271350467
- Arduino PIC programmer : http://ardu

tekaikko

Hi!

A good project!
In case interested, I've created an Arduino programmer for PIC32 series. The details are found at http://code.google.com/p/ardupic32/.

Cheers!

Hi Soranne!

I think you save me! Please tell me that I can program a PIC18F452 or a PIC16F88 (with I prefer) using your project.

Soranne


Hi Soranne!

I think you save me! Please tell me that I can program a PIC18F452 or a PIC16F88 (with I prefer) using your project.


Hey!
Of course you can! But depending on the protocol they use you may need to adapt a bit the code.
My projects :
- Interfacing with Minitel : http://www.arduino.cc/cgi-bin/yabb2/YaBB.pl?num=1271350467
- Arduino PIC programmer : http://ardu

Soranne

But personnaly I would prefer the beaglebone to the raspberry pi ;)
The beaglebone looks more like an arduino (you can easily access the inputs/outputs and and shields)  and is more powerful than a raspberry pi, even if it's a bit more expensive.
My projects :
- Interfacing with Minitel : http://www.arduino.cc/cgi-bin/yabb2/YaBB.pl?num=1271350467
- Arduino PIC programmer : http://ardu

itchan

#57
May 24, 2012, 09:03 am Last Edit: May 24, 2012, 09:25 am by itchan Reason: 1
How do i connect the pic16f684? I checked the datasheet and it doesnt have pins labeled as RB4 RB6 AND RB7? :(

spunky

Hi all,

Mine is PIC16F887

Im trying to program it using your programmer (the .exe application) and have few question.

How to send the command "s" ? i want to program using low voltage.

and how to wire it? here's what I got from my PIC datasheet.(attached)


hoping someone can give me circuit suggesstion. thanks  :)

BlueGuzz

Hint: If you look at post #2 and there is no link to the *.exe file, you have to create a forum account and log in. An advise in post #2 would be nice.

Go Up
 


Please enter a valid email to subscribe

Confirm your email address

We need to confirm your email address.
To complete the subscription, please click the link in the email we just sent you.

Thank you for subscribing!

Arduino
via Egeo 16
Torino, 10131
Italy