Go Down

Topic: Breadboard Arduino (Read 769 times) previous topic - next topic

Gofilord

Hi there,
I have the ATmega328 chip with a simple 'Blink' program, I would like to run the program on a breadboard. All I found in the internet is one clear circuit, but just for reference I would like another one.
And by circuit, I mean schamatic, not a picture and not a connection table or something.
- You can also pass the reset button, don't need that.
- and the 5V regulator, I have a 5V supply.

Thanks!

Runaway Pancake

http://arduino.cc/it/uploads/Main/arduino-duemilanove-schematic.pdf
"Hello, I must be going..."
"You gotta fight -- for your right -- to party!"
Don't react - Read.
"Who is like unto the beast? who is able to make war with him?"

JoeO

Why don't you supply the link that you DID find on the internet.  Then you don't have to worry that someone will give you the same one back.

Gofilord

Do they "lock" threads here when they become useless? if so, you may lock this one, I now have the right schamatic. Thanks and sorry for the trouble!

jwatte

You might want to consider actually posting the second resource you got, too, for others with the same question. This forum is not only for you to ask that the community give you something, it's also for you to give back to the community.

CrossRoads

#5
Feb 25, 2012, 09:13 pm Last Edit: Feb 25, 2012, 09:17 pm by CrossRoads Reason: 1
Here's what I use for a minimal circuit "arduino",
and a little board I just made for testing out a '1284 and different ways for bootloading/programming (to have something more stable than a solderless breadboard).
I typically leave off the reset switch, power LED, and indicator LED, and just connect one up temporarily if needed.
For testing, I just connected an LED with series resistor from a pin to gnd on the power connector.
I think I'll add a few headers with just ground connections and keep this a little test bed.
The board has 15pF caps instead of 22pF as that's what I had on hand.
The headers are regular PCB mount headers pressed into wirewrap socket strips, same as the uC is installed into.
Designing & building electrical circuits for over 25 years.  Screw Shield for Mega/Due/Uno,  Bobuino with ATMega1284P, & other '328P & '1284P creations & offerings at  my website.

Go Up