Topic: Memsic2125 Project
(Read 461 times)
Feb 29, 2012, 10:27 pm
Win7x64, Ardino Uno R3:
I am trying to get this Memsic Dual-Axis Acceleromater' from RadioShack (Mx2125)
using this tutorial example: http://arduino.cc/en/Tutorial/Memsic2125?from=Tutorial.AccelerometerMemsic2125
My memsic has no Triangle on it.
? 1) Do I have the wrong memsic for this project?
"I can't see any evidence of a connection to a (printer)console."
When i first upload the pgm, lights (TX,RX) flash for a while, then stop.
And then the only lights on are the 'L (white)light' and the 'on (green)light'.
When I unplug the usb cable, then plug it back in,
then the only lights on are the 'L (white)light' and the 'on (green)light'.
To again get any lights flashing, requires an 'upLoad' each time.
"I can't see any evidence of a connection to the printer."
? 2) What should I be seeing, as evidence that the (printer)Console is connected to this project?
Win7x64, Arduino Uno R3, from Sparkfun
"All things in moderation, except for love and forgiveness"... www.vmars316.com