I'm gathering together some bits as the data is apparantly sent over 433.92MHz AM radio by OOK (On-Off-Keying) and there is some info on the 'tinterweb about the protocols used.
I may just get another weather station with serial out on the receiving consol and do it that way.
I also have a Raspberry Pi on order (for ages now), maybe a low power web server and automatic weather station??!!
Too many projects and not enough time...!
The RF22 can certainly do OOK, but it will not be trivial to do the software to read whatever protocol they use... Maybe it's possible to intercept the data before it gets to the transmitter on the weather station, and use your own tx rx? I also want a Raspberry!
In regards to the RFM22B I've talked to someone that is trying to get some as well and the only ones he could find
available were the RFM22B-868-D, will those work?
Does it need to be the 433 model or it's possible to change the frequency.
The 868MHz version should work just fine. I can even change my 434 module to 960MHz, but obviously it won't work very well. You might need to make sure that 868MHz is a legal frequency in Ireland!
Okay one thing iv noticed between the different in graph that you postted and the one i posted yours seems to be a lot cleaner and not as jagged spiked like mine . but that said mine is set to max output.
once i get my board from you i would like to use it to test home made 433 radios . what would be the best set of settings for use with RF probes and not antennas? i would image i would set the Tx/Rx power right down to minimum ?
Did you leave it alone to gather data for long enough? The peak value should smooth out over time.
I think the best way to test radio output would be to connect the tx to rx directly with an attenuator, so you don't have to worry about antenna weirdness. Then again, I am definitely not qualified to answer any RF related questions!