Go Down

Topic: ATMEGA 3216 (Read 1 time) previous topic - next topic

samjack

Hello,
i have a question about an ATMEGA 3216.
can i use it with arduino uno?

i want to use it. I dont know how to use AVR on a UNO

Coding Badly


I cannot find an "ATMEGA 3216".  Did you mean "ATmega32 / ATmega16"?

samjack

no, atmega3216PI is what i read on the chip

Coding Badly


Is it a 40 pin PDIP monster that looks something like this...
http://parts.digikey.com/1/parts/552198-ic-avr-mcu-32k-16mhz-ind-40-dip-atmega32-16pi.html

samjack

can i program that chip?

CrossRoads

Sure. You can do a lot more with ATMega1284P tho.

If you want to stick with that chip, suggest you start here:
http://www.avr-developers.com/
Designing & building electrical circuits for over 25 years.  Screw Shield for Mega/Due/Uno,  Bobuino with ATMega1284P, & other '328P & '1284P creations & offerings at  my website.

samjack


Sure. You can do a lot more with ATMega1284P tho.

If you want to stick with that chip, suggest you start here:
http://www.avr-developers.com/

How must i connect it to write to it?

Coding Badly


MISO to MISO, MOSI to MOSI, SCK to SCK, SS to RESET, GND to GND, +5V to VCCA

MISO - digital pin 12 on the Uno; PB6 (physical pin 7) on the ATmega32

MOSI - digital pin 11 on the Uno; PB5 (physical pin 6) on the ATmega32

SCK - digital pin 13 on the Uno; PB7 (physical pin 8) on the ATmega32

SS - digital pin 10 on the Uno; physical pin 9 on the ATmega32


A Assuming the target (ATmega32) is powered by the Arduino Uno.

samjack

i dont know how to do it in the arduino software. which board i have to take.

Coding Badly


I can't help with that one.

bamboosam

Just read up on forums... Google is your friend, thats where I have learned everything. Tutorials ect.....

Go Up