Pages: [1]   Go Down
Author Topic: Arduino, ZigBee and USB Host Shield Project in Southern California  (Read 1336 times)
0 Members and 1 Guest are viewing this topic.
Los Angeles
Offline Offline
Newbie
*
Karma: 0
Posts: 1
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Looking to hire someone to design a system using 7 Arduinos, 1 master and 6 slaves.  Basically the master would receive commands from a USB game controller (via USB Host Shield) and wirelessly send serial commands the slaves to create digital and analog outputs on the slave Arduinos.  You ideally need experience with each part of this.  I'm assuming there's a way to use a USB host shield AND a ZigBee on the same Arduino?  These are things you''d need to help me understand and implement.  Let me know if you're interested.  Thanks.

Logged

Miers 46500 France
Offline Offline
Sr. Member
****
Karma: 14
Posts: 327
EmbeddedAT .. From Concept to Prototype to Production
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

Hi,

All of this is easily do-able.

A bit more information about the controller and what commands you are planning to send with it would be helpful.

You have several way to approach this as a project, both in terms of hardware/software design and hardware choices.

I have sent you a PM so as not to clutter the board too much.

Cheers Pete.
Logged

EmbeddedAT .. From Concept to Prototype to Production

Electronics and firmware design and project mentoring

ਪੰਜਾਬ
Offline Offline
Edison Member
*
Karma: 12
Posts: 1618
Another year! Alone! :(
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

Pm'ed
Logged

"Real Men can Accomplish  Anything"
-  Website  
- skype : nishants5  

ਫ਼ਤੇਹ ਕਰੂਂ !

Pages: [1]   Go Up
Jump to: