Pages: [1]   Go Down
Author Topic: Write to a HID Device with the USB Host Shield  (Read 976 times)
0 Members and 1 Guest are viewing this topic.
Offline Offline
Newbie
*
Karma: 0
Posts: 3
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Hi,

I've got a Problem with sending commands to a HID Device.
I can send the commands with the Tool SimpleHIDWrite (http://www.lvr.com/files/SimpleHIDWrite3.zip) and that works well -> I've got the Commands.
But i don't know how to send these commands to the HID Device.

For Example:
I want to turn on the LED of a keyboard.
With the Tool SimpleHIDWrite, I send the command "0x01" to the HID Device and the LED turns on.

How can i send these command to the HID Device with the USB Host Shield?
Logged

BCN
Offline Offline
Newbie
*
Karma: 0
Posts: 13
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

Hi, it all depends on which libraries are you using (and USB Host Shield Board). I suggest try using the code from the Cheeky Mail Notifier. Where they are sending a message to the device.

But I think that code is prior Arduino 1.0 and USB Host Shield 2.0

Tell me if you have any luck and what boards are you using.
Logged

We don't rest in peace we just disappear

Pages: [1]   Go Up
Jump to: