Pages: [1]   Go Down
Author Topic: GLCD Panel definition header for HJ19264A  (Read 857 times)
0 Members and 1 Guest are viewing this topic.
Hungary
Offline Offline
Newbie
*
Karma: 0
Posts: 2
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

hi,

as I only found pages in chinese for the ks107/108 based display HJ19264A - data sheet: http://www.huijinglcd.com/UploadFiles/201192313837201.rar (got it on ebay for 19$) and the default GLCD (v3) ks108 panel definition needed tweaking for proper chip selection, thought to share the resulting header file to save the hassle for others.

The display is ks108 (or equivalent) based, 192x64; 3 chips with 3 CS pins that need to be set as follows:
chip / pinCS0CS1CS2
chip 0LOWHIGHHIGH
chip 1HIGHLOWHIGH
chip 2HIGHHIGHLOW

It is implemented in the file attached. Enjoy!

* ks0108_HJ19264A.h (5.77 KB - downloaded 20 times.)
Logged

Dallas, TX USA
Offline Offline
Edison Member
*
Karma: 47
Posts: 2328
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Ah, it uses inverted chip select logic.
Thanks for the information. I'll included it in a panel file in future glcd library releases.

--- bill
Logged

Pages: [1]   Go Up
Jump to: