Go Down

Topic: Mega 2560 Eagle file zip is broken (Read 2342 times) previous topic - next topic

LMI

The file arduino-mega2560_R3-reference-design.zip at http://arduino.cc/en/Main/ArduinoBoardMega2560 does not open, and when I open it with WinRAR the program says it is broken. It is easy to believe, the zip is about 100kbytes but there should be 1MB schematic file in it.

CrossRoads

Designing & building electrical circuits for over 25 years.  Screw Shield for Mega/Due/Uno,  Bobuino with ATMega1284P, & other '328P & '1284P creations & offerings at  my website.

jgowen

to:arduino forum
re:arduino-mega2560_R3-reference-design.zip
Wed 4/11/2012 4:40 pm

Hi. So I bought a 2560 R3 @ 2/1/12 @ amazon, and finally, lazy man that I am, got around to looking at the Eagle schematic. Which is wrong of course, being for the first revision. So I downloaded arduino-mega2560_R3-reference-design.zip -- and *it's* broken! ... So I guess I wasn't lazy enough....

So where's that exciting R3 eagle schematic/PCB board?!?!?

j.g. owen * web: http://owenlabs.org

CrossRoads

Designing & building electrical circuits for over 25 years.  Screw Shield for Mega/Due/Uno,  Bobuino with ATMega1284P, & other '328P & '1284P creations & offerings at  my website.

s-light

Hi @ all ;-)
i just downloaded 'http://arduino.cc/en/uploads/Main/arduino-mega2560_R3-reference-design.zip' with firefox.
and with totalcomander it was all fine to unzip it. the files unzipped are also fine.
Sizes:
161,8k  arduino-mega2560_R3-reference-design.zip
294,2k  Arduino_MEGA_2560-Rev3.brd
1,2M     Arduino_MEGA_2560-Rev3.sch

sunny greetings

Stefan

PS: @Moderator : its possible to merge this topic with http://arduino.cc/forum/index.php/topic,98942.0.html ?

chrishjones

Tried to open both files in Eagle. Invalid data in file error for both.

CrossRoads

Try again chrishjones - I just opened it - its definitely fixed.
Designing & building electrical circuits for over 25 years.  Screw Shield for Mega/Due/Uno,  Bobuino with ATMega1284P, & other '328P & '1284P creations & offerings at  my website.

jgowen

to:arduino forum
re:arduino-mega2560_R3-reference-design.zip
Tue 5/15/2012 6:21 pm

I downloaded

arduino-mega2560_R3-reference-design.zip   165,739 5/15/12  6:17:10p

just now and unzipped these two files:

Arduino_MEGA_2560-Rev3.brd                 301,362 1/04/12 12:40:28p
Arduino_MEGA_2560-Rev3.sch               1,282,256 1/04/12 12:40:28p

Double-clicking either one produces

Invalid data in file "Arduino_Mega_2560-Rev3.sch"

or ".brd" as the case may be. This is broken, has been broken, and probably will be broken for quite a while, or at least as long as the Arduweeny think they need for a sufficient headstart on the cloners. Or maybe that's just a wacko theory....

-- best wishes,

j.g. owen * web: http://owenlabs.org

LMI

Those files are tricky. Sometimes they are corrupted, sometimes not. I can confirm: I have got uncorrupted Arduino files not long ago.

marco0711

Hi all,

EAGLE files: Arduino_ADK-Mega_2560-Rev3-reference-design.zip

can't open in EAGLE 5.11 only in EAGLE 6.x

Where can I get this Arduino_ADK-Mega_2560-Rev3-reference-design.zip file for EAGLE 5.11 ?

thx for answer...


CrossRoads

Answered elsewhere already - download Eagle 6.0, 6.1.
Designing & building electrical circuits for over 25 years.  Screw Shield for Mega/Due/Uno,  Bobuino with ATMega1284P, & other '328P & '1284P creations & offerings at  my website.

Go Up