I was following these directions to install LininoIO, which ask that in U-Boot I set the console baud to 250000: linino> setenv baudrate 250000 It worked and I saved it to flash. But ever since then bootconsole (initial boot) is nothing but gibberish. I have tried and tried to get back into U-Boot…

bootconsole Gibberish - Baud Rate Wrong

Quantumn March 5, 2019, 4:28pm 4

(uh oh, SS has disappeared)

Topic		Replies	Views
Weird characters while booting Arduino Yún	5	1152	May 6, 2021
Arduino Nano isn't working well with Baud rate 9600 bps, why? IDE 1.x	9	19501	May 5, 2021
No access to U-Boot using Serial / Linux "fw_printenv" utility (After upgrade..) Arduino Yún	13	7522	May 6, 2021
arduino yun- WiFi bad - Linino is Bad Data CRC Arduino Yún	3	1548	May 6, 2021
I am trying to access the console of the yun. Arduino Yún	2	1076	May 6, 2021