[Application Blynk et carte Nodemcu v3] Modifier les identifiants wifi à dist.

fdufnews · November 30, 2018, 8:17am

Il me semble que c'est dans les exemples de codes lorsque tu installes la chaine de développement ESP8266 dans l'IDEArduino

github.com

esp8266/Arduino/blob/master/libraries/DNSServer/examples/CaptivePortalAdvanced/CaptivePortalAdvanced.ino

#include <ESP8266WiFi.h>
#include <WiFiClient.h>
#include <ESP8266WebServer.h>
#include <DNSServer.h>
#include <ESP8266mDNS.h>
#include <EEPROM.h>

/*
   This example serves a "hello world" on a WLAN and a SoftAP at the same time.
   The SoftAP allow you to configure WLAN parameters at run time. They are not setup in the sketch but saved on EEPROM.

   Connect your computer or cell phone to wifi network ESP_ap with password 12345678. A popup may appear and it allow you to go to WLAN config. If it does not then navigate to http://192.168.4.1/wifi and config it there.
   Then wait for the module to connect to your wifi and take note of the WLAN IP it got. Then you can disconnect from ESP_ap and return to your regular WLAN.

   Now the ESP8266 is in your network. You can reach it through http://192.168.x.x/ (the IP you took note of) or maybe at http://esp8266.local too.

   This is a captive portal because through the softAP it will redirect any http request to http://192.168.4.1/
*/

/* Set these to your desired softAP credentials. They are not configurable at runtime */

This file has been truncated. show original

Il y a ça aussi

Topic		Replies	Views
nodemcu modifier variables en wifi Français	35	2893	May 6, 2021
mauvaise connexion a internet ( blynk ) Français	1	435	May 6, 2021
Controle t/h avec l'app blynk et ESP8266 MOD-12f Français	2	584	May 6, 2021
Besoin d'un petit coup de pouce pour demarrer avec NodeMCU Français	5	741	May 6, 2021
utilisation carte node MCU AMICA ESP8266 Français	10	1546	May 6, 2021

[Application Blynk et carte Nodemcu v3] Modifier les identifiants wifi à dist.

Related Topics