Je viens de suivre tes conseils et viens de modifier le code.
#include <DS3232RTC.h>
#include <Time.h>
#include <Wire.h>
#include "FastLED.h"
#define NUM_LEDS 114 // Number of LED controles (remember I have 3 leds / controler
#define COLOR_ORDER BRG // Define color order for your strip
#define DATA_PIN 6 // Data pin for led comunication
CRGB leds[NUM_LEDS]; // Define LEDs strip
byte digits[10][28] = {
{0,0,0,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1}, //0
{0,0,0,0,0,0,0,0,0,0,0,0,1,1,1,1,1,1,1,1,0,0,0,0,0,0,0,0}, //1
{1,1,1,1,1,1,1,1,1,1,1,1,0,0,0,0,1,1,1,1,1,1,1,1,0,0,0,0}, //2
{1,1,1,1,0,0,0,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,0,0,0,0}, //3
{1,1,1,1,0,0,0,0,0,0,0,0,1,1,1,1,1,1,1,1,0,0,0,0,1,1,1,1}, //4
{1,1,1,1,0,0,0,0,1,1,1,1,1,1,1,1,0,0,0,0,1,1,1,1,1,1,1,1}, //5
{1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,0,0,0,0,1,1,1,1,1,1,1,1}, //6
{0,0,0,0,0,0,0,0,0,0,0,0,1,1,1,1,1,1,1,1,1,1,1,1,0,0,0,0}, //7
{1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1}, //8
{1,1,1,1,0,0,0,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1}, //9 | 2D Array for numbers on 7 segment
};
bool Dot = true; //Dot state
bool DST = false; //DST state
int ledColor = 0x0000FF; // Color used (in hex)
void setup(){
// Serial.begin(9600);
// Wire.begin();
LEDS.addLeds<WS2811, DATA_PIN, COLOR_ORDER>(leds, NUM_LEDS); // Set LED strip type
LEDS.setBrightness(255); // Set initial brightness
pinMode(2, INPUT_PULLUP); // Define DST adjust button pin
pinMode(4, INPUT_PULLUP); // Define Minutes adjust button pin
pinMode(5, INPUT_PULLUP); // Define Hours adjust button pin
}
// Get time in a single number, if hours will be a single digit then time will be displayed 155 instead of 0155
int GetTime(){
tmElements_t Now;
RTC.read(Now);
//time_t Now = RTC.Now();// Getting the current Time and storing it into a DateTime object
int hour=Now.Hour;
int minutes=Now.Minute;
int second =Now.Second;
if (second % 2==0) {Dot = false;}
else {Dot = true;};
return (hour*100+minutes);
};
// Check Light sensor and set brightness accordingly
void BrightnessCheck(){
const byte sensorPin = 3; // light sensor pin
const byte brightnessLow = 5; // Low brightness value
const byte brightnessHigh = 255; // High brightness value
int sensorValue = digitalRead(sensorPin); // Read sensor
if (sensorValue == 0) {LEDS.setBrightness(brightnessHigh);}
else {LEDS.setBrightness(brightnessLow);}
};
// Convert time to array needet for display
void TimeToArray(){
int Now = GetTime(); // Get time
int cursor = 0;
// Serial.print("Time is: ");Serial.println(Now);
if (DST){ // if DST is true then add one hour
Now+=100;
// Serial.print("DST is ON, time set to : ");Serial.println(Now);
};
if (Dot){leds[56]=ledColor;
leds[57]=ledColor;}
else {leds[56]=0x000000;
leds[57]=0x000000;
};
for(int i=1;i<=4;i++){
int digit = Now % 10; // get last digit in time
if (i==1){
// Serial.print("Digit 4 is : ");Serial.print(digit);Serial.print(" ");
cursor =86;
for (int k = 0; k <= 27; k++) {
// Serial.print(digits[digit][k]);
leds[cursor+k] = ledColor * digits[digit][k];
cursor ++;
}
// Serial.println();
}
else if (i==2){
// Serial.print("Digit 3 is : ");Serial.print(digit);Serial.print(" ");
cursor -=58;
for (int k = 0; k <= 27; k++) {
// Serial.print(digits[digit][k]);
leds[cursor+k] = ledColor * digits[digit][k];
cursor ++;
}
// Serial.println();
}
else if (i==3){
// Serial.print("Digit 2 is : ");Serial.print(digit);Serial.print(" ");
cursor =28;
for (int k = 0; k <= 27; k++) {
// Serial.print(digits[digit][k]);
leds[cursor+k] = ledColor * digits[digit][k];
cursor ++;
}
// Serial.println();
}
else if (i==4){
// Serial.print("Digit 1 is : ");Serial.print(digit);Serial.print(" ");
cursor =0;
for (int k = 0; k <= 27; k++) {
// Serial.print(digits[digit][k]);
leds[cursor+k] = ledColor * digits[digit][k];
cursor ++;
}
// Serial.println();
}
Now /= 10;
};
};
void DSTcheck(){
int buttonDST = digitalRead(2);
// Serial.print("DST is: ");Serial.println(DST);
if (buttonDST == LOW){
if (DST){
DST=false;
// Serial.print("Switching DST to: ");Serial.println(DST);
}
else if (!DST){
DST=true;
// Serial.print("Switching DST to: ");Serial.println(DST);
};
delay(500);
};
}
void TimeAdjust(){
int buttonH = digitalRead(5);
int buttonM = digitalRead(4);
if (buttonH == LOW || buttonM == LOW){
delay(500);
tmElements_t Now;
RTC.read(Now);
int hour=Now.Hour;
int minutes=Now.Minute;
int second =Now.Second;
if (buttonH == LOW){
if (Now.Hour== 23){Now.Hour=0;}
else {Now.Hour += 1;};
}else {
if (Now.Minute== 59){Now.Minute=0;}
else {Now.Minute += 1;};
};
RTC.write(Now);
}
}
void loop() // Main loop
{
BrightnessCheck(); // Check brightness
DSTcheck(); // Check DST
TimeAdjust(); // Check to se if time is geting modified
TimeToArray(); // Get leds array with required configuration
FastLED.show(); // Display leds array
}
Si je comprend bien je doit supprimer tout les ; après les accolades fermante ?