Hi! I have made a code that uses the timer 1 to create a 60hz signal on pin 10 with the duty cycle of 0.03% void setup() { TCCR1A = _BV(COM1B1) | _BV(WGM11) | _BV(WGM10); TCCR1B = _BV(WGM12) |_BV(WGM13) | _BV(CS12); OCR1A = 1025; //16000000hz/256hz/60hz ≈ 1025 pinMode(10, OUTPUT); …

Question about timer1

piuhis3 September 21, 2019, 8:14pm 5

Edited the main post.

Topic		Replies	Views
instant help Programming Questions	10	2108	May 5, 2021
Timer1 works on Uno, but not Mega 2560 Programming Questions	15	16199	May 5, 2021
Programming the hardware timers - advanced level Programming Questions	10	5753	May 5, 2021
programming timer1 for more than 8 bits Syntax & Programs	1	859	May 6, 2021
ATMEGA328 - Using OCR1B in tandem with OCR1A Programming Questions	3	3047	May 5, 2021