Hey guys,
I really need to get this bootloader on the atmega328P. Im struggling. I tried,
I also tried uploading the bootloader with 2 uno, I remember connecting pin12 to pin 12 a method llike that i found online somewhere.
avrdude: stk500_getsync(): not in sync: resp=0x00, I get this error for first method cant remember the second one. But I got error aswel.
This is what I have: 2 arduino Uno. I also have an old ATMEL AVR board. says its the stk500. Both the chips were previously loaded with this bootloader long time ago. Have no idea how they were bootloader. Just got told that they are bootloaded. pin 13 is flashing but when i use the arduino IDE 1.0 to load any sketch onto it, i get Binary sketch size: 1026 bytes (of a 32256 byte maximum)
avrdude: stk500_getsync(): not in sync: resp=0x00
Can someone please tell me step by how to do this. Im losing my head here.I looked at so many things online.
I also got AVR studio 5.1 installed.
Maybe if someone can give me a step by step run through how to use AVR studio 5.1 with the stk500 ATMEL AVR board to program the bootloader onto the ATMEGA328P-PU this would help.
Ill give it another shot. I really dont want to buy pre programmed chips.
And also maybe what I can try to get the bootloader on using two arduino UNOs.
Id really appreciate it. Thanx guys. Sorry for all the inconvience