OK, I did some extra analysis on the signal and came up with the following 'extrapolated' timings.
Replace the timings in the erod signal as follows:
(replace the first value with the second, such that the only timings are 850 and 290 in the signal)
948 --> 850
184 290
948 850
184 290
376 290
752 850
952 850
180 290
380 290
752 850
380 290
752 850
948 850
160 290
400 290
752 850
384 290
748 850
380 290
752 850
380 290
748 850
384 --> 290
Again try all of the frequencies.
If that doesn't work, then I suggest you get a 56kHz IRreceiver, which is my best guess,for you, at this stage.
PS: it looks like I left a comma at the start of the erod signal last time (but you seem to have removed it which was correct)