Fehlermeldung

International Deutsch
1

Hallo zusammen!
ich kenn mich mit dem ganzen nicht so aus, hab mich aber trotzdem daran gewagt, an meinem AnetA8 ein neues Lcd zu verbauen und zu flashen. Es sah auch alles gut aus bis aber beim hochladen diese Fehlermeldung aufgetaucht ist. Ich wäre euch mega dankbar wenn mir das chinesische jemand übersetzen kann! Lieben Dank!!
Nadja

Arduino: 1.8.5 (Mac OS X), Board: "Anet V1.0"

In file included from /Users/anwender/Downloads/Anet A8/Arduino.app/Contents/Java/hardware/arduino/avr/cores/arduino/Arduino.h:257:0,
                from sketch/Marlin.ino.cpp:1:
/Users/anwender/Documents/Arduino/hardware/anet/avr/variants/sanguino/pins_arduino.h:43:0: warning: "TIMER2" redefined
#define TIMER2  5
^
In file included from sketch/Marlin.ino.cpp:1:0:
/Users/anwender/Downloads/Anet A8/Arduino.app/Contents/Java/hardware/arduino/avr/cores/arduino/Arduino.h:210:0: note: this is the location of the previous definition
#define TIMER2  6
^
In file included from /Users/anwender/Downloads/Anet A8/Arduino.app/Contents/Java/hardware/arduino/avr/cores/arduino/Arduino.h:257:0,
                from sketch/Marlin.ino.cpp:1:
/Users/anwender/Documents/Arduino/hardware/anet/avr/variants/sanguino/pins_arduino.h:44:0: warning: "TIMER2A" redefined
#define TIMER2A 6
^
In file included from sketch/Marlin.ino.cpp:1:0:
/Users/anwender/Downloads/Anet A8/Arduino.app/Contents/Java/hardware/arduino/avr/cores/arduino/Arduino.h:211:0: note: this is the location of the previous definition
#define TIMER2A 7
^
In file included from /Users/anwender/Downloads/Anet A8/Arduino.app/Contents/Java/hardware/arduino/avr/cores/arduino/Arduino.h:257:0,
                from sketch/Marlin.ino.cpp:1:
/Users/anwender/Documents/Arduino/hardware/anet/avr/variants/sanguino/pins_arduino.h:45:0: warning: "TIMER2B" redefined
#define TIMER2B 7
^
In file included from sketch/Marlin.ino.cpp:1:0:
/Users/anwender/Downloads/Anet A8/Arduino.app/Contents/Java/hardware/arduino/avr/cores/arduino/Arduino.h:212:0: note: this is the location of the previous definition
#define TIMER2B 8
^
In file included from /Users/anwender/Downloads/Anet A8/Arduino.app/Contents/Java/hardware/arduino/avr/cores/arduino/Arduino.h:257:0,
                from sketch/Marlin.ino.cpp:1:
/Users/anwender/Documents/Arduino/hardware/anet/avr/variants/sanguino/pins_arduino.h:47:0: warning: "TIMER3A" redefined
#define TIMER3A 8
^
In file included from sketch/Marlin.ino.cpp:1:0:
/Users/anwender/Downloads/Anet A8/Arduino.app/Contents/Java/hardware/arduino/avr/cores/arduino/Arduino.h:214:0: note: this is the location of the previous definition
#define TIMER3A 9
^
In file included from /Users/anwender/Downloads/Anet A8/Arduino.app/Contents/Java/hardware/arduino/avr/cores/arduino/Arduino.h:257:0,
                from sketch/Marlin.ino.cpp:1:
/Users/anwender/Documents/Arduino/hardware/anet/avr/variants/sanguino/pins_arduino.h:48:0: warning: "TIMER3B" redefined
#define TIMER3B 9
^
In file included from sketch/Marlin.ino.cpp:1:0:
/Users/anwender/Downloads/Anet A8/Arduino.app/Contents/Java/hardware/arduino/avr/cores/arduino/Arduino.h:215:0: note: this is the location of the previous definition
#define TIMER3B 10
^
In file included from /Users/anwender/Downloads/Anet A8/Arduino.app/Contents/Java/hardware/arduino/avr/cores/arduino/Arduino.h:257:0,
                from sketch/Marlin.ino.cpp:1:
/Users/anwender/Documents/Arduino/hardware/anet/avr/variants/sanguino/pins_arduino.h:49:0: warning: "TIMER3C" redefined
#define TIMER3C 10
^
In file included from sketch/Marlin.ino.cpp:1:0:
/Users/anwender/Downloads/Anet A8/Arduino.app/Contents/Java/hardware/arduino/avr/cores/arduino/Arduino.h:216:0: note: this is the location of the previous definition
#define TIMER3C 11
^
In file included from /Users/anwender/Downloads/Anet A8/Arduino.app/Contents/Java/hardware/arduino/avr/cores/arduino/Arduino.h:257:0,
                from sketch/Marlin.ino.cpp:1:
/Users/anwender/Documents/Arduino/hardware/anet/avr/variants/sanguino/pins_arduino.h:50:0: warning: "TIMER4A" redefined
#define TIMER4A 11
^
In file included from sketch/Marlin.ino.cpp:1:0:
/Users/anwender/Downloads/Anet A8/Arduino.app/Contents/Java/hardware/arduino/avr/cores/arduino/Arduino.h:217:0: note: this is the location of the previous definition
#define TIMER4A 12
^
In file included from /Users/anwender/Downloads/Anet A8/Arduino.app/Contents/Java/hardware/arduino/avr/cores/arduino/Arduino.h:257:0,
                from sketch/Marlin.ino.cpp:1:
/Users/anwender/Documents/Arduino/hardware/anet/avr/variants/sanguino/pins_arduino.h:51:0: warning: "TIMER4B" redefined
#define TIMER4B 12
^
In file included from sketch/Marlin.ino.cpp:1:0:
/Users/anwender/Downloads/Anet A8/Arduino.app/Contents/Java/hardware/arduino/avr/cores/arduino/Arduino.h:218:0: note: this is the location of the previous definition
#define TIMER4B 13
^
In file included from /Users/anwender/Downloads/Anet A8/Arduino.app/Contents/Java/hardware/arduino/avr/cores/arduino/Arduino.h:257:0,
                from sketch/Marlin.ino.cpp:1:
/Users/anwender/Documents/Arduino/hardware/anet/avr/variants/sanguino/pins_arduino.h:52:0: warning: "TIMER4C" redefined
#define TIMER4C 13
^
In file included from sketch/Marlin.ino.cpp:1:0:
/Users/anwender/Downloads/Anet A8/Arduino.app/Contents/Java/hardware/arduino/avr/cores/arduino/Arduino.h:219:0: note: this is the location of the previous definition
#define TIMER4C 14
^
In file included from /Users/anwender/Downloads/Anet A8/Arduino.app/Contents/Java/hardware/arduino/avr/cores/arduino/Arduino.h:257:0,
                from sketch/Marlin.ino.cpp:1:
/Users/anwender/Documents/Arduino/hardware/anet/avr/variants/sanguino/pins_arduino.h:53:0: warning: "TIMER5A" redefined
#define TIMER5A 14
^
In file included from sketch/Marlin.ino.cpp:1:0:
/Users/anwender/Downloads/Anet A8/Arduino.app/Contents/Java/hardware/arduino/avr/cores/arduino/Arduino.h:221:0: note: this is the location of the previous definition
#define TIMER5A 16
^
In file included from /Users/anwender/Downloads/Anet A8/Arduino.app/Contents/Java/hardware/arduino/avr/cores/arduino/Arduino.h:257:0,
                from sketch/Marlin.ino.cpp:1:
/Users/anwender/Documents/Arduino/hardware/anet/avr/variants/sanguino/pins_arduino.h:54:0: warning: "TIMER5B" redefined
#define TIMER5B 15
^
In file included from sketch/Marlin.ino.cpp:1:0:
/Users/anwender/Downloads/Anet A8/Arduino.app/Contents/Java/hardware/arduino/avr/cores/arduino/Arduino.h:222:0: note: this is the location of the previous definition
#define TIMER5B 17
^
In file included from /Users/anwender/Downloads/Anet A8/Arduino.app/Contents/Java/hardware/arduino/avr/cores/arduino/Arduino.h:257:0,
                from sketch/Marlin.ino.cpp:1:
/Users/anwender/Documents/Arduino/hardware/anet/avr/variants/sanguino/pins_arduino.h:55:0: warning: "TIMER5C" redefined
#define TIMER5C 16
^
In file included from sketch/Marlin.ino.cpp:1:0:
/Users/anwender/Downloads/Anet A8/Arduino.app/Contents/Java/hardware/arduino/avr/cores/arduino/Arduino.h:223:0: note: this is the location of the previous definition
#define TIMER5C 18
^
Der Sketch verwendet 103210 Bytes (81%) des Programmspeicherplatzes. Das Maximum sind 126976 Bytes.
Globale Variablen verwenden 4167 Bytes des dynamischen Speichers.
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x00
Problem beim Hochladen auf das Board. Hilfestellung dazu unter http://www.arduino.cc/en/Guide/Troubleshooting#upload.

Dieser Bericht wäre detaillierter, wenn die Option
"Ausführliche Ausgabe während der Kompilierung"
in Datei -> Voreinstellungen aktiviert wäre.
2

Hi

Du hast wohl zwei Sketche zusammen kopiert oder einen Sketch 2x eingefügt.
Oben wird recht viel angemeckert, was Du zwei Mal definierst.
Z.B.:
..._arduino.h:52:0: warning: "TIMER4C" redefined
In Zeile 52 ab Zeichen Null (also ganz am Anfang) wrd TIMER4C erneut definiert (redefined)
Die Folgezeile:
.../Arduino.h:219:0: note: this is the location of the previous definition
#define TIMER4C 14
sagt Dir, wo der Timer bereits definiert wurde.
In der Arduino.h in Zeile 219

Sind allerdings NUR Warnungen - wenn Dir bewusst ist, was Du machst, kannst Du damit lebe.
Wenn nicht, kann Dich Das bei weiteren Änderungen kalt erwischen.

Die unteren Meldungen besagen, daß der Programmer nicht antwortet (manches Mal hilft es wirklich, den Kram stur ins Deutsche übersetzen zu lassen ... Google kann so was).
Entweder hast Du ein falsches Target gewählt - bei mir gerne NANO eingestellt und UNO angesteckt.
ODER
Der Treiber für den Programmer ist defekt.
Bei OSx habe ich gar keine Aktien - da muß ich passen :confused:

MfG

3

Danke dir schon mal für deine Antworten. Ich werde es nochmal unter Windows versuchen....
naja bewusst bin ich mir nicht :smiley:
Bin da als Frau zwar technisch schon auf dem laufenden aber sowas hab ich noch nicht gemacht. :-/
Lg

4

Was ist ein "AnetA8" ?
ok G sagt ein 3D Drucker.

Jezt weiß ich nicht welchen Controller drauf ist.
Hast Du irgendeine Anleitung zum Laden der Firmware?

Grüße Uwe