Due won't start after power off-on, have to reset

Hardware Arduino Due
81

atrakonline:
Hi
I met this problem too .
For solving this problem , I increase the time of board's Reset .
I used a 10K resistor and a 100uf capacitor in series and connect common point of them to RESET pin of board. also 1 pin of 10K to 3.3v and minus pin of capacitor to GND

The Problem solved .

Thanks

Thank you very much! This solution worked for me. Also had the problem that I needed to do a second manual reset for the board to turn on properly. Very easy fix, no tiny soldering or firmware update.