Hi all!
I have been updating the first post in this thread with our schedule, so you can have a better sense on when things are going to happen.
@spyguy518 what do you mean with password protected? everything is in HTTPS and you have to log in your Arduino account to access the Editor
@MRMAINT62 I agree with you on the Library behavior, we have been discussing similar solutions internally. It is a big structural change so it won't happen in the next few months, but we have it in mind.
Oh I get it, yes we are implementing a public/private project feature, currently all your projects are private but it won't be so in the future, thanks!
I wish ability to use local values that will not be saved, only used i local compilation of code. Specifically when setting password such as in Wi-Fi sketches where User, Password, IP, DNS and MAC should never be stored publicly.
One way could be to have a protected "credentials" page in your Arduino profile where values can be changed and stored and never by mistake be uploaded or stored in public code. Another suggestion is ability to add a tab "locked.h" for temporary storage of sensitive values and have that tab server-side encrypted salted with user Arduino Create credentials.
Values from a "credentials" entry or "locked.h" file could be linked in sketch with a reference like "//securevalue:p14" when stored and replaced with secure value reference p14 (Password number 14) during compile.
I'd like to debug with the Arduino Zero board. Basic debugging, as breakpoints and variable monitoring, would be great.
The debugging feature on the Zero board is a real step forward compared to previous generation of Arduino boards.
Once the online backend is stabilised, do you plan to release a version to run on an Arduino board with Linux, e.g. Yún or Edison? Intenet ins't available everywhere...
My things I really want:
-Support for screens smaller than 1024px (e.g. 1280x720)
-A phone app or support for a mobile site. (App is preferrable.)
-Assuming said app, USB OTG support so the Arduino can be programmed via being hooked up to the phone.
-A chromebook plugin. Unless that already exists.
Just realized chromebook plugin is already on the radar. Oh well. Another thing I'd suggest is allowing for the hidden functions like setup and loop to stay hidden permanently, rather than re-expanding each time I open the program.
I want to upload sketch through internet from outside. it's very difficult to carry hardware outside . few some time its very complicated. so I can connect my hardware with internet connection through lab dextop , open arduino create with my ID. then i can configure - update from outside ,through internet & my laptop. still now i don't have live experiment but i belie that i can do this with arduino create.
And one another think we can
.
Move the "Serial Monitor" view (pop out window)
i want to make a different type graph with serial monitor value. with a single click . type of option must be there.
I don't want to be rude, but I wish Arduino Create's projects weren't so polluted of Azure/Windows 10 (and 1sheeld) stuff. It seems (is it??) a sponsorized site.
Digitalis:
A circuit simulator would be nice as well, although I don't know how easy it would be to make.
Totally agree !
For education, that would be great tools !
I'm a french STEM teacher and instructor for teacher, for kids from 9 to 19, my software (Blockly@rduino) is very popular in France & Quebec too (they are just discovering Arduino for Education ! That's great : http://recitmst.qc.ca/arduino/).
And what we need :
integrate your plugin in web browser : when PC are totally 'frozen', with a portable browser and a plugin in it we can work without installing anything....
use plugin to upload to IDE Arduino installed on computer if someone prefer use it
integrate your editor like a plugin in a web page, that's what I did with Codebender
Everything is working, although there are a few things that I'd recommend. As a lot of people have mentioned, I need a board manager to make Arduino Create truly useful, as I spend more time developing for 3rd party boards like the Adafruit ones and barebones Atmel boards like the Attiny than I do developing for Arduino/Genuino boards.
2nd point - it would be literally awesome if you could include some kind of 123d circuits integration. 123d circuits has an "electronics lab" where you can actually simulate a variety of boards like the Uno, Nano, and ESP8266 with a virtual breadboard, and virtually upload code to these virtual boards. 123d circuits also allows you to develop schematics. So, I think that it'd be awesome if there was some kind of import function that could take the code already in 123d circuits, convert it to a sketch, and take the schematic and put that in there too.
scanet:
Totally agree !
For education, that would be great tools !
I'm a french STEM teacher and instructor for teacher, for kids from 9 to 19, my software (Blockly@rduino) is very popular in France & Quebec too (they are just discovering Arduino for Education ! That's great : http://recitmst.qc.ca/arduino/).
And what we need :
integrate your plugin in web browser : when PC are totally 'frozen', with a portable browser and a plugin in it we can work without installing anything....
use plugin to upload to IDE Arduino installed on computer if someone prefer use it
integrate your editor like a plugin in a web page, that's what I did with Codebender
And as said : Fritzing + simulator !!!
Thanks a lot for your work !
Whilst it isn't EXACTLY what you asked for, I'd reccomend looking at 123D circuits. It lets people build circuits using a virtual breadboard in their web browser and has support for the ATTiny85, Arduino Micro, and Arduino Uno.
I have some project where I need to use a protoboard to minimize the space I need, and I'd like to burn the bootloader on an atmega328p. I know the ArduinoISP sketch is in the example tab but, i wish i had a online tool to burn it.
It'll be nice to completely remove the use of the desktop app.
By the way, I use the minimal hardware configuration for my microcontroler (No clock) So being able to upload a sketch with the editor would be awesome! Like adding a new board.
This is what the compiler say when I try to follow the step on this thread:
"avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0xf3"
OS : Win10, Browser : Chrome, Board used in editor : Arduino Uno