Hi, I got this error below when i try to upload my sketch using the HC-05 module to my new Arduino Uno R3. I have verified that my baudrate match with the baudrate bluetooth and the right outgoing com port the bluetooth used, i also verified that the correct Arduino Board was selected. On the othe…

Error Uploading Sketch via Bluetooth - avrdude: stk500_getsync(): not in sync: r

BigPapaZ May 29, 2019, 10:25pm 7

So were you able to figure it out? I am having similar issues.

Topic		Replies	Views
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x00 IDE 1.x	4	1324	May 5, 2021
avrdude: stk500_getsync(): not in sync: resp=0x00 Networking, Protocols, and Devices	1	776	May 6, 2021
Arduino UNO avrdude: stk500_getsync(): not in sync: resp=0x30 IDE 1.x	5	7547	May 5, 2021
Error that appears only when connecting bluetooth module Avrdude, stk500, Bootloader issues	2	1052	May 6, 2021
[SOLVED] Uploading Error with Arduino UNO Avrdude, stk500, Bootloader issues	21	3797	January 8, 2022