arduino isp error burning bootloader to fresh atmega32u4

Hello Community,

i designed my own arduino leonardo board with an atmega32u4-au

the pcbs and the circuit are fine! i have one working board so this is no HW issue.
i cant upload the bootloader ! but with one board in the same setup it worked perfectly!
soldering checkt 20000% DMM tests etc...

i googled for hours...

now i get this error with all boards :frowning:

Bootloading Problem:

ArduinoMega2560 = ISP

Arduino IDE 1.0.3

Source atmega32u4-au ISP

bin kohm$ ./avrdude -C avr/etc/avrdude.conf [b]-v -v -v -v -F -t -u -V -B 1000 -patmega32u4 -carduino[/b] -P/dev/cu.usbmodem1451 -b19200 -e -Ulock:w:0x3F:m -Uefuse:w:0xcb:m -Uhfuse:w:0xd8:m -Ulfuse:w:0xff:m 

avrdude: Version 5.11, compiled on Sep  2 2011 at 18:52:52
         Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
         Copyright (c) 2007-2009 Joerg Wunsch

         System wide configuration file is "/Applications/Arduino.app/Contents/Resources/Java/hardware/tools/avr/etc/avrdude.conf"
         User configuration file is "/Users/kohm/.avrduderc"
         User configuration file does not exist or is not a regular file, skipping

         Using Port                    : /dev/cu.usbmodem1451
         Using Programmer              : arduino
         Overriding Baud Rate          : 19200
         Setting bit clk period        : 1000.0
avrdude: Send: 0 [30]   [20] 
avrdude: Send: 0 [30]   [20] 
avrdude: Send: 0 [30]   [20] 
avrdude: Recv: . [14] 
avrdude: Recv: . [10] 
         AVR Part                      : ATmega32U4
         Chip Erase delay              : 9000 us
         PAGEL                         : PD7
         BS2                           : PA0
         RESET disposition             : dedicated
         RETRY pulse                   : SCK
         serial program mode           : yes
         parallel program mode         : yes
         Timeout                       : 200
         StabDelay                     : 100
         CmdexeDelay                   : 25
         SyncLoops                     : 32
         ByteDelay                     : 0
         PollIndex                     : 3
         PollValue                     : 0x53
         Memory Detail                 :

                                  Block Poll               Page                       Polled
           Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack
           ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
           eeprom        65    10     8    0 no       1024    8      0  9000  9000 0x00 0x00
                                  Block Poll               Page                       Polled
           Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack
           ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
           flash         65     6   128    0 yes     32768  128    256  4500  4500 0x00 0x00
                                  Block Poll               Page                       Polled
           Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack
           ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
           lfuse          0     0     0    0 no          1    0      0  9000  9000 0x00 0x00
                                  Block Poll               Page                       Polled
           Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack
           ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
           hfuse          0     0     0    0 no          1    0      0  9000  9000 0x00 0x00
                                  Block Poll               Page                       Polled
           Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack
           ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
           efuse          0     0     0    0 no          1    0      0  9000  9000 0x00 0x00
                                  Block Poll               Page                       Polled
           Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack
           ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
           lock           0     0     0    0 no          1    0      0  9000  9000 0x00 0x00
                                  Block Poll               Page                       Polled
           Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack
           ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
           calibration    0     0     0    0 no          1    0      0     0     0 0x00 0x00
                                  Block Poll               Page                       Polled
           Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack
           ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
           signature      0     0     0    0 no          3    0      0     0     0 0x00 0x00

         Programmer Type : Arduino
         Description     : Arduino
avrdude: Send: A [41] . [80]   [20] 
avrdude: Recv: . [14] 
avrdude: Recv: . [02] 
avrdude: Recv: . [10] 
avrdude: Send: A [41] . [81]   [20] 
avrdude: Recv: . [14] 
avrdude: Recv: . [01] 
avrdude: Recv: . [10] 
avrdude: Send: A [41] . [82]   [20] 
avrdude: Recv: . [14] 
avrdude: Recv: . [12] 
avrdude: Recv: . [10] 
avrdude: Send: A [41] . [98]   [20] 
avrdude: Recv: . [14] 
avrdude: Recv: . [00] 
avrdude: Recv: . [10] 
         Hardware Version: 2
         Firmware Version: 1.18
         Topcard         : Unknown
avrdude: Send: A [41] . [84]   [20] 
avrdude: Recv: . [14] 
avrdude: Recv: . [00] 
avrdude: Recv: . [10] 
avrdude: Send: A [41] . [85]   [20] 
avrdude: Recv: . [14] 
avrdude: Recv: . [00] 
avrdude: Recv: . [10] 
avrdude: Send: A [41] . [86]   [20] 
avrdude: Recv: . [14] 
avrdude: Recv: . [00] 
avrdude: Recv: . [10] 
avrdude: Send: A [41] . [87]   [20] 
avrdude: Recv: . [14] 
avrdude: Recv: . [00] 
avrdude: Recv: . [10] 
avrdude: Send: A [41] . [89]   [20] 
avrdude: Recv: . [14] 
avrdude: Recv: . [00] 
avrdude: Recv: . [10] 
         Vtarget         : 0.0 V
         Varef           : 0.0 V
         Oscillator      : Off
         SCK period      : 0.1 us

avrdude: Send: A [41] . [81]   [20] 
avrdude: Recv: . [14] 
avrdude: Recv: . [01] 
avrdude: Recv: . [10] 
avrdude: Send: A [41] . [82]   [20] 
avrdude: Recv: . [14] 
avrdude: Recv: . [12] 
avrdude: Recv: . [10] 
avrdude: Send: B [42] . [00] . [00] . [00] . [01] . [01] . [01] . [01] . [03] . [00] . [00] . [00] . [00] . [00] . [80] . [04] . [00] . [00] . [00] . [80] . [00]   [20] 
avrdude: Recv: . [14] 
avrdude: Recv: . [10] 
avrdude: Send: E [45] . [05] . [08] . [d7] . [a0] . [00]   [20] 
avrdude: Recv: . [14] 
avrdude: Recv: . [10] 
avrdude: Send: P [50]   [20] 
avrdude: Recv: . [14] 
avrdude: Recv: . [10] 
avrdude: AVR device initialized and ready to accept instructions

avrdude: 1 bytes of lfuse written
avrdude: Send: Q [51]   [20] 
avrdude: Recv: . [14] 
avrdude: Recv: . [10] 

  Thank you.

:confused:

Could you try the newest Arduino IDE 1.6.4 and burn the bootloader from within the Arduino IDE.
Are you running this in linux ? I hope you don't use the Arduino IDE 1.0.3 from the repositories.

Do you have something else to program a ATmega chip ? An Arduino Uno perhaps ? I have USBasp version 2, but I had to add a rule for that in linux.

hi peter,

i try this in macosx

it is the old release 1.0.3 and with one of my boards all works!?!

this is crazy....

more -v-v debug infos

i use my atmega2560 as arduino isp

The communication is going wrong. Reading the lfuse, hfuse, efuse return all three only zero. That is probably a MISO or MOSI signal going bad.

It could be a very thin copper trace that shortcuts something. Or there is something that has a larger capacitance. Of a voltage level from a voltage regulator is slightly different. Or the ATmega32U4 is damaged. Or not enough decoupling capacitors. Or a bad ground wiring.

My best advice is to change as much as possible. An other programmer, other computer, other cables, and so on.

[ADDED] Maybe I'm wrong, and it is as Isaac96 writes in Reply #4. The newer versions of avrdude read the chip settings from the avrdude.conf file.

Looks like you don't have a avrdude.conf file or you have the wrong path for it. You could try reburning the other board you have to see if it works. The comms appear to be all right, but your ISP isn't reading the device signature.

thank you !!!

i get the same error also inside the arduino IDE if i hit "Burn bootloader"

so i think thr avrdude.conf is ok?

yikies! invaild device signature ;(

i check my HW setup today but again, one off my boards work!

i ordered and USB ISP programmer at ebay and check this also!

what should be inside the avrdude.conf?

avrdude is ok, i reuploaded the isp sketch to my mega2560. all ok

maybe i have the wrong commandline?

i read about 100000 times to NOT use the -F flag in avrdude but with -F and -V it looks good except for the fuses ;(

is there any wayni can burn the leonardobootloader using FLIP with Win?

everytime i try to select the HEX file, flip says, wrong checksume, to big file???

my board layout

i checkt all connections, all ok...

somtimes if i touch the UCAP 1uf i get device signature 0xffffff and not 0x0000

changed usb cabel usb port another pc..

this is wired....

You should never use the -F flag. The -v is only extra debug output and that is okay.
When for example a new microcontroller is used, say ATmega328Px and the avrdude only knows the ATmega328P then the -F could be used if they are identical. You should try to find what causes the mismatch of the signatures.

Definitely do not use -F ! It takes away useful info. It does look like you have avrdude.conf. If your device signature returns all zeros, then that usually means a comms problem. You said you have another 32u4 board- can you try reburning the bootloader on that one?

thanks for the hint! no more -F

i have some teensy boards, try to flash one with my mega2560 via isp.

i dont want to kill my working prototype but can i not coppy the working chip to another??

You can probably move the chip, if that's what you need.

sorry for my bad english :wink:

coppy the Software from my working prototype (bootloader and prgramm) in one hex file to another atmega32u4 with Atmels FLIP ?

in flip i see the chip via usb.
but the bootloader is the atmega32uf-DFU?

i cant flash the teensy via my atmega ISP - cstk500 not in sync...

i soldered an new prototype, same error :-(

avrdude -c vrdude.conf  -v -v -v -v -pm32u4 -cstk500v1 -P/dev/tty.usbmodem1451 -b19200 -Ulock:w:0x3F:m -Uefuse:w:0xcb:m -Uhfuse:w:0xd8:m -Ulfuse:w:0xff:m 

avrdude: Version 6.0.1, compiled on Dec 16 2013 at 17:26:24
        Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
        Copyright (c) 2007-2009 Joerg Wunsch

        System wide configuration file is "/usr/local/CrossPack-AVR-20131216/etc/avrdude.conf"
        User configuration file is "/Users/kohm/.avrduderc"
        User configuration file does not exist or is not a regular file, skipping

        Using Port                    : /dev/tty.usbmodem1451
        Using Programmer              : stk500v1
        Overriding Baud Rate          : 19200
        Setting bit clk period        : 20.0
avrdude: Send: 0 [30]   [20] 
avrdude: Send: 0 [30]   [20] 
avrdude: Send: 0 [30]   [20] 
avrdude: Recv: . [14] 
avrdude: Recv: . [10] 
        AVR Part                      : ATmega32U4
        Chip Erase delay              : 9000 us
        PAGEL                         : PD7
        BS2                           : PA0
        RESET disposition             : dedicated
        RETRY pulse                   : SCK
        serial program mode           : yes
        parallel program mode         : yes
        Timeout                       : 200
        StabDelay                     : 100
        CmdexeDelay                   : 25
        SyncLoops                     : 32
        ByteDelay                     : 0
        PollIndex                     : 3
        PollValue                     : 0x53
        Memory Detail                 :

                                 Block Poll               Page                       Polled
          Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack
          ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
          eeprom        65    20     4    0 no       1024    4      0  9000  9000 0x00 0x00
                                 Block Poll               Page                       Polled
          Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack
          ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
          flash         65     6   128    0 yes     32768  128    256  4500  4500 0x00 0x00
                                 Block Poll               Page                       Polled
          Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack
          ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
          lfuse          0     0     0    0 no          1    0      0  9000  9000 0x00 0x00
                                 Block Poll               Page                       Polled
          Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack
          ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
          hfuse          0     0     0    0 no          1    0      0  9000  9000 0x00 0x00
                                 Block Poll               Page                       Polled
          Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack
          ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
          efuse          0     0     0    0 no          1    0      0  9000  9000 0x00 0x00
                                 Block Poll               Page                       Polled
          Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack
          ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
          lock           0     0     0    0 no          1    0      0  9000  9000 0x00 0x00
                                 Block Poll               Page                       Polled
          Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack
          ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
          calibration    0     0     0    0 no          1    0      0     0     0 0x00 0x00
                                 Block Poll               Page                       Polled
          Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack
          ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
          signature      0     0     0    0 no          3    0      0     0     0 0x00 0x00

        Programmer Type : STK500
        Description     : Atmel STK500 Version 1.x firmware

avrdude: Recv: . [00] 
avrdude: Recv: . [10] 
        Hardware Version: 2
        Firmware Version: 1.18
        Topcard         : Unknown
avrdude: Send: A [41] . [84]   [20] 
avrdude: Recv: . [14] 
avrdude: Recv: . [00] 
avrdude: Recv: . [10] 
avrdude: Send: A [41] . [85]   [20] 
avrdude: Recv: . [14] 
avrdude: Recv: . [00] 
avrdude: Recv: . [10] 
avrdude: Send: A [41] . [86]   [20] 
avrdude: Recv: . [14] 
avrdude: Recv: . [00] 
avrdude: Recv: . [10] 
avrdude: Send: A [41] . [87]   [20] 
avrdude: Recv: . [14] 
avrdude: Recv: . [00] 
avrdude: Recv: . [10] 
avrdude: Send: A [41] . [89]   [20] 
avrdude: Recv: . [14] 
avrdude: Recv: . [00] 
avrdude: Recv: . [10] 
        Vtarget         : 0.0 V
        Varef           : 0.0 V
        Oscillator      : Off
        SCK period      : 0.1 us
 . [04] . [d7] . [a0] . [00]   [20] 
avrdude: Recv: . [14] 
avrdude: Recv: . [10] 
avrdude: Send: P [50]   [20] 
avrdude: Recv: . [14] 
avrdude: Recv: . [10] 
avrdude: AVR device initialized and ready to accept instructions

Reading |                                                    | 0% 0.00savrdude: Send: V [56] 0 [30] . [00] . [00] . [00]   [20] 
avrdude: Recv: . [14] 
avrdude: Recv: . [00] 
avrdude: Recv: . [10] 
avrdude: Send: V [56] 0 [30] . [00] . [01] . [00]   [20] 
avrdude: Recv: . [14] 
avrdude: Recv: . [00] 
avrdude: Recv: . [10] 
Reading | #################                                  | 33% 0.03savrdude: Send: V [56] 0 [30] . [00] . [02] . [00]   [20] 
avrdude: Recv: . [14] 
avrdude: Recv: . [00] 
avrdude: Recv: . [10] 
Reading | | 100% 0.05s

avrdude: Device signature = 0x000000 (retrying)

Reading |                                                    | 0% 0.00savrdude: Send: V [56] 0 [30] . [00] . [00] . [00]   [20] 
avrdude: Recv: . [14] 
avrdude: Recv: . [00] 
avrdude: Recv: . [10] 
avrdude: Send: V [56] 0 [30] . [00] . [01] . [00]   [20] 
avrdude: Recv: . [14] 
avrdude: Recv: . [00] 
avrdude: Recv: . [10] 
Reading | #################                                  | 33% 0.04savrdude: Send: V [56] 0 [30] . [00] . [02] . [00]   [20] 
avrdude: Recv: . [14] 
avrdude: Recv: . [00] 
avrdude: Recv: . [10] 
Reading | ################################################## | 100% 0.06s

avrdude: Device signature = 0x000000 (retrying)

Reading |                                                    | 0% 0.00savrdude: Send: V [56] 0 [30] . [00] . [00] . [00]   [20] 
avrdude: Recv: . [14] 
avrdude: Recv: . [00] 
avrdude: Recv: . [10] 
avrdude: Send: V [56] 0 [30] . [00] . [01] . [00]   [20] 
avrdude: Recv: . [14] 
avrdude: Recv: . [00] 
avrdude: Recv: . [10] 
Reading | #################                                  | 33% 0.03savrdude: Send: V [56] 0 [30] . [00] . [02] . [00]   [20] 
avrdude: Recv: . [14] 
avrdude: Recv: . [00] 
avrdude: Recv: . [10] 
Reading | ################################################## | 100% 0.05s

avrdude: Device signature = 0x000000
avrdude: Yikes!  Invalid device signature.
        Double check connections and try again, or use -F to override
        this check.

avrdude: Send: Q [51]   [20] 
avrdude: Recv: . [14] 
avrdude: Recv: . [10] 

avrdude done.  Thank you.

arduino 1.6

/Users/kohm/Downloads/Arduino.app/Contents/Java/hardware/tools/avr/bin/avrdude -C/Users/kohm/Downloads/Arduino.app/Contents/Java/hardware/tools/avr/etc/avrdude.conf -v -patmega32u4 -cstk500v1 -P/dev/cu.usbmodem1451 -b19200 -e -Ulock:w:0x3F:m -Uefuse:w:0xcb:m -Uhfuse:w:0xd8:m -Ulfuse:w:0xff:m

avrdude: Version 6.0.1, compiled on Apr 14 2015 at 16:30:25
Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
Copyright (c) 2007-2009 Joerg Wunsch

System wide configuration file is "/Users/kohm/Downloads/Arduino.app/Contents/Java/hardware/tools/avr/etc/avrdude.conf"
User configuration file is "/Users/kohm/.avrduderc"
User configuration file does not exist or is not a regular file, skipping

Using Port : /dev/cu.usbmodem1451
Using Programmer : stk500v1
Overriding Baud Rate : 19200
AVR Part : ATmega32U4
Chip Erase delay : 9000 us
PAGEL : PD7
BS2 : PA0
RESET disposition : dedicated
RETRY pulse : SCK
serial program mode : yes
parallel program mode : yes
Timeout : 200
StabDelay : 100
CmdexeDelay : 25
SyncLoops : 32
ByteDelay : 0
PollIndex : 3
PollValue : 0x53
Memory Detail :

Block Poll Page Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack


eeprom 65 20 4 0 no 1024 4 0 9000 9000 0x00 0x00
flash 65 6 128 0 yes 32768 128 256 4500 4500 0x00 0x00
lfuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00
hfuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00
efuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00
lock 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00
calibration 0 0 0 0 no 1 0 0 0 0 0x00 0x00
signature 0 0 0 0 no 3 0 0 0 0 0x00 0x00

Programmer Type : STK500
Description : Atmel STK500 Version 1.x firmware
Hardware Version: 2
Firmware Version: 1.18
Topcard : Unknown
Vtarget : 0.0 V
Varef : 0.0 V
Oscillator : Off
SCK period : 0.1 us

avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.05s

avrdude: Device signature = 0x000000 (retrying)

Reading | ################################################## | 100% 0.05s

avrdude: Device signature = 0x000000 (retrying)

Reading | ################################################## | 100% 0.05s

avrdude: Device signature = 0x000000
avrdude: Yikes! Invalid device signature.
Double check connections and try again, or use -F to override
this check.

avrdude done. Thank you.

now i was able to set on fuse???

avrdude: safemode: lfuse changed! Was 62, and is now 0
Would you like this fuse to be changed back? [y/n] n
avrdude: safemode: Fuses OK (H:00, E:00, L:62)
avrdude: Send: Q [51] [20]
avrdude: Recv: . [14]
avrdude: Recv: . [10]

Probably a wiring problem. Please post pictures!

Schematic

Atmega2560 as ISP

My Board ISP Header

Connection

Main Atmega32u4 circuit

my atmega2560 ISP the teensy, try to burn bootloader is the same error...

/Applications/Arduino.app/Contents/Resources/Java/hardware/tools/avr/bin/avrdude -C/Applications/Arduino.app/Contents/Resources/Java/hardware/tools/avr/etc/avrdude.conf -v -v -v -v -patmega32u4 -cstk500v1 -P/dev/cu.usbmodem1451 -b19200 -e -Ulock:w:0x3F:m -Uefuse:w:0xcb:m -Uhfuse:w:0xd8:m -Ulfuse:w:0xff:m

avrdude: Version 5.11, compiled on Sep 2 2011 at 18:52:52
Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
Copyright (c) 2007-2009 Joerg Wunsch

System wide configuration file is "/Applications/Arduino.app/Contents/Resources/Java/hardware/tools/avr/etc/avrdude.conf"
User configuration file is "/Users/kohm/.avrduderc"
User configuration file does not exist or is not a regular file, skipping

Using Port : /dev/cu.usbmodem1451
Using Programmer : stk500v1
Overriding Baud Rate : 19200
avrdude: Send: 0 [30] [20]
avrdude: Send: 0 [30] [20]
avrdude: Send: 0 [30] [20]
avrdude: Recv: . [14]
avrdude: Recv: . [10]
AVR Part : ATmega32U4
Chip Erase delay : 9000 us
PAGEL : PD7
BS2 : PA0
RESET disposition : dedicated
RETRY pulse : SCK
serial program mode : yes
parallel program mode : yes
Timeout : 200
StabDelay : 100
CmdexeDelay : 25
SyncLoops : 32
ByteDelay : 0
PollIndex : 3
PollValue : 0x53
Memory Detail :

Block Poll Page Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack


eeprom 65 10 8 0 no 1024 8 0 9000 9000 0x00 0x00
Block Poll Page Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack


flash 65 6 128 0 yes 32768 128 256 4500 4500 0x00 0x00
Block Poll Page Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack


lfuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00
Block Poll Page Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack


hfuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00
Block Poll Page Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack


efuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00
Block Poll Page Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack


lock 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00
Block Poll Page Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack


calibration 0 0 0 0 no 1 0 0 0 0 0x00 0x00
Block Poll Page Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack


signature 0 0 0 0 no 3 0 0 0 0 0x00 0x00

Programmer Type : STK500
Description : Atmel STK500 Version 1.x firmware
avrdude: Send: A [41] . [80] [20]
avrdude: Recv: . [14]
avrdude: Recv: . [02]
avrdude: Recv: . [10]
avrdude: Send: A [41] . [81] [20]
avrdude: Recv: . [14]
avrdude: Recv: . [01]
avrdude: Recv: . [10]
avrdude: Send: A [41] . [82] [20]
avrdude: Recv: . [14]
avrdude: Recv: . [12]
avrdude: Recv: . [10]
avrdude: Send: A [41] . [98] [20]
avrdude: Recv: . [14]
avrdude: Recv: . [00]
avrdude: Recv: . [10]
Hardware Version: 2
Firmware Version: 1.18
Topcard : Unknown
avrdude: Send: A [41] . [84] [20]
avrdude: Recv: . [14]
avrdude: Recv: . [00]
avrdude: Recv: . [10]
avrdude: Send: A [41] . [85] [20]
avrdude: Recv: . [14]
avrdude: Recv: . [00]
avrdude: Recv: . [10]
avrdude: Send: A [41] . [86] [20]
avrdude: Recv: . [14]
avrdude: Recv: . [00]
avrdude: Recv: . [10]
avrdude: Send: A [41] . [87] [20]
avrdude: Recv: . [14]
avrdude: Recv: . [00]
avrdude: Recv: . [10]
avrdude: Send: A [41] . [89] [20]
avrdude: Recv: . [14]
avrdude: Recv: . [00]
avrdude: Recv: . [10]
Vtarget : 0.0 V
Varef : 0.0 V
Oscillator : Off
SCK period : 0.1 us

avrdude: Send: A [41] . [81] [20]
avrdude: Recv: . [14]
avrdude: Recv: . [01]
avrdude: Recv: . [10]
avrdude: Send: A [41] . [82] [20]
avrdude: Recv: . [14]
avrdude: Recv: . [12]
avrdude: Recv: . [10]
avrdude: Send: B [42] . [00] . [00] . [00] . [01] . [01] . [01] . [01] . [03] . [00] . [00] . [00] . [00] . [00] . [80] . [04] . [00] . [00] . [00] . [80] . [00] [20]
avrdude: Recv: . [14]
avrdude: Recv: . [10]
avrdude: Send: E [45] . [05] . [08] . [d7] . [a0] . [00] [20]
avrdude: Recv: . [14]
avrdude: Recv: . [10]
avrdude: Send: P [50] [20]
avrdude: Recv: . [14]
avrdude: Recv: . [10]
avrdude: AVR device initialized and ready to accept instructions

Reading | avrdude: Send: V [56] 0 [30] . [00] . [00] . [00] [20]
avrdude: Recv: . [14]
avrdude: Recv: . [00]
avrdude: Recv: . [10]
avrdude: Send: V [56] 0 [30] . [00] . [01] . [00] [20]
avrdude: Recv: . [14]
avrdude: Recv: . [00]
avrdude: Recv: . [10]
################avrdude: Send: V [56] 0 [30] . [00] . [02] . [00] [20]
avrdude: Recv: . [14]
avrdude: Recv: . [00]
avrdude: Recv: . [10]
################################## | 100% 0.06s

avrdude: Device signature = 0x000000
avrdude: Yikes! Invalid device signature.
Double check connections and try again, or use -F to override
this check.

avrdude: Send: Q [51] [20]
avrdude: Recv: . [14]
avrdude: Recv: . [10]

avrdude done. Thank you.