robotics

Projects Discussion and Showcase Robotics
1

i want to connect RPM Tracking sensor(input) to the board and using this data(input ) operate the two solenoids with in the time 0- 25 milliseconds which ARDUINO BOARD is suitable for my project.

RPM =3000 to 6000
solenoid type = DC
Voltage =12 v
soleniods speed =0 to 25 milliseconds

2

i want to connect RPM Tracking sensor

Specifically, what sensor?

operate the two solenoids

What two solenoids?

with in the time 0- 25 milliseconds

What does that mean? Read the RPM, and then randomly pick a time in that range, activate the solenoid for that amount of time, and then turn it off?

which ARDUINO BOARD is suitable for my project.

Any of the blue ones.

3

PaulS:
Any of the blue ones.

Since I can't buy you a beer, we have to settle for Karma++

4

PaulS:
1Q:Specifically, what sensor?

A: Engine speed(rpm) tracking sensor

2Q :What two solenoids?

A: push and pull type (Linear motion ) solenoids

3Q: What does that mean? Read the RPM, and then randomly pick a time in that range, activate the solenoid for that amount of time, and then turn it off?

A: yes you are right

4Q:Any of the blue ones.
A: Iam cannot understand this statement

5Q:can add these two atduino boards?
(Arduino Uno REV3 [Original - Made in Italy] ATmega328P) and
(New 2A H-Bridge 2 way DC Motor Driver Module L298P Shield For Arduino)

s-l1600.jpg
s-l1600.jpg1000×1000 148 KB

s-l1600 (1).jpg
s-l1600 (1).jpg1024×1024 136 KB

s-l1600.jpg
s-l1600.jpg1000×1000 148 KB

5

@NEELISAMPATH,
Do you have links to the datasheets for your sensor and solenoids?

Or have you not decided yet which you will get?

4Q:Any of the blue ones.
A: Iam cannot understand this statement

This was a humorous way of saying that any arduino will work for this task.

6

vinceherman:
@NEELISAMPATH,

Do you have links to the datasheets for your sensor and solenoids?
i dont have data sheet

have you not decided yet which you will get?

yes

7

Hi,
OPs two images,

b17914f7a25b518bcb72ffd7b9095d531caec225.jpg
b17914f7a25b518bcb72ffd7b9095d531caec225.jpg1000×1000 148 KB

99bada44032cdf09756f3e702f68ac9036f63e66.jpg
99bada44032cdf09756f3e702f68ac9036f63e66.jpg1024×1024 136 KB

Tom.. :slight_smile:

8

Hi,
What we need are;

  • Data/specs for the sensor.
  • Data/specs for the solenoids.

What is the application?
What are you trying to accomplish?

Tom... :slight_smile:

9

TomGeorge:
Hi,
What we need are;

Requirements of solenoids

  1. Voltage - 12 v
  2. Stroke - 80 to 100 mm (pull and push type)
  3. Force - 700N (operate the 125 cc bike engine valve)
  4. Duty cycle - 30 to 35 mins
  5. Response speed** - 0 to 25 milliseconds
  6. Type - DC
  7. Quantity - 2
  8. Structure - Tubular

** Stroke complete in 0 to 25 milliseconds

sensor requirements

"Segolike Car Engine Crankshaft Position Sensor for VW Passat B5 Bora OEM 0261210165"
1)hall type sensor
2)RPM-5000