8x8x8 multiplexed LED cube with an Arduino Mega 2560

I ordered some of these from thaishine.com
N
Manufacturer Part No: IRF3205

Specification
Mosfet Type N-channel
Current Rating 110A
Rds (On) 8m?
Voltage Rated 55V

P
Manufacturer Part No: IRF9540

Description
MOSFET
Transistor Type:MOSFET
Transistor Polarity:P Channel
Drain Source Voltage, Vds:-100V
Continuous Drain Current, Id:-23A
On Resistance, Rds(on):117mohm
Rds(on) Test Voltage, Vgs:-10V

They were under $1 each in packs of 10.

I also found these (below), after I had ordered the above fets.

Mosfet Type: P-channel
Current Rating: 2.6A
Rds (On): 40 mOhm
Voltage Rated: 12V
Package: SSOT-3

Mosfet Type: N-channel
Current Rating: 4A
Rds (On): 100 mOhm
Voltage Rated: 60V
Package: SOT-223

They are smaller package, but probably suitable for my 1 amp needs. they may be suitable for 1.3 amp, you have to check.

Im not sure which one I got it from, thaishine also sells through ebay.
www.thaishine.com
www.taydaelectronics.com

I am way behind on those cubes, and I havnt had a chance to use the parts, but I assume they will be good for cubes/multiplexing.