Go Down

Topic: Serial on the Arduino Zero (Read 1 time) previous topic - next topic

stealthtransam

Can I talk to Arduino Zero over different Serial Ports at the same time.  IE.  Use the Native port for one serial, the Programming port for a second Serial, and pins 1/0 for a third serial? 

I know the Atmel chip has 6 SERCOMs on it i see 2 are dedicated to the I2C and the SPI bus from the datasheet. and it looks like 1 is attached to the EDGB for the programming/debugging/ and virtual com port/  and then there is a CDC on the Native port so that isn't taking up a SERCOM.




stealthtransam

Can retract this question I found the answer on another thread:

http://forum.arduino.cc/index.php?topic=330588.0

Go Up