Arduino: 1.8.5 (Windows 10), Board: "Arduino/Genuino Uno"
C:\Users\Bloom\OneDrive\Documents\Arduino\sketch_dec06a\sketch_dec06a.ino: In function 'void loop()':
C:\Users\Bloom\OneDrive\Documents\Arduino\sketch_dec06a\sketch_dec06a.ino:19:43: warning: integer overflow in expression [-Woverflow]
#define OVERSPEED_SHUTDOWN_PERIOD 30 * 60 * 1000 // How long to shut down after overspeed (in milliseconds).
^
C:\Users\Bloom\OneDrive\Documents\Arduino\sketch_dec06a\sketch_dec06a.ino:131:63: note: in expansion of macro 'OVERSPEED_SHUTDOWN_PERIOD'
if (overspeedShutdown && millis() - overspeedShutdownTime > OVERSPEED_SHUTDOWN_PERIOD) { // Shutdown has been long enough.
^
Sketch uses 4560 bytes (14%) of program storage space. Maximum is 32256 bytes.
Global variables use 752 bytes (36%) of dynamic memory, leaving 1296 bytes for local variables. Maximum is 2048 bytes.
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x75
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x75
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x75
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x75
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x75
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x75
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x75
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x75
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x75
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x75
Problem uploading to board. See http://www.arduino.cc/en/Guide/Troubleshooting#upload for suggestions.
This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.