hi together,
At first big thanks for the coding.
I hope this project is still alive.
Is that code also on github?
I found some issues, maybe copy and paste. --> sie the marked area (2 times)
case 24:
while (escape == 0) {
checkeditbutton();
buttons(8);
set_month = constrain(set_[b]day[/b], 1, 12);
lcd.setCursor(0, 0);
lcd.print (F("set month"));
lcd.setCursor(0, 1);
lcd.print(standardText[0]);
lcd.setCursor(0, 2);
lcd.print (F("enter month"));
addSpace(1);
lcd.print (set_month);
lcd.setCursor(0, 3);
lcd.print(standardText[1]);
}
editMode = 0;
clock_update = 1;
break;
case 25:
while (escape == 0) {
checkeditbutton();
buttons(9);
set_year = constrain(set_[b]day[/b], 2017, 2030);
//set year here
lcd.setCursor(0, 0);
lcd.print (F("set year"));
lcd.setCursor(0, 1);
lcd.print(standardText[0]);
lcd.setCursor(0, 2);
lcd.print (F("enter year"));
addSpace(1);
lcd.print(set_year);
lcd.setCursor(0, 3);
lcd.print(standardText[1]);
}
then i have an other problem mybe someone can support me in that case --> see Picture
is it possible to clear it first?
When you start the turner test it didnt start at counter 0 and increase to the target. It depends when you start the turner test
I add my sketch. i changed the dht22 to an si7021 sensor.
incmaincode_Hogen.ino (48 KB)