Hello all,
I'm trying to connect my colorduino v1.3 with a uartsbee v4.0 but I can't manage to get to right wiring.
On the Colorduino side I have the following outputs :
DTR
GND
TXD
RXD
VDD
GND
SCL
SDA
and on the uartsbee, the following inputs :
GND
CTS
VCC
TX
RX
DTR
I've connected GND to GND, DTR to DTR, TXD to TX, RXD to RX
I guess VCC goes on VDD (but not sure) and I don't where to connect CTS (and what it is).
Help would great.
Thanks for reading !